County Durham · England

Non-Slip Bath Coating for Hart homes

Clear non-slip coatings for baths and shower trays at your home in Hart, with a one-year guarantee on every repair.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Hart

About our non-slip bath coating in Hart

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Whether it’s a bath or tray that is slippery when wet and safety for older or less mobile people, we can typically put it right, whatever the material.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Hart (TS27)
Area hub
County Durham
Guarantee
A year, on every repair
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Common questions in Hart

Will the price change on the day?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Are there extra charges for Hart?

We do not add a call-out fee. Your fixed quote includes everything.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

When a repair isn’t the answer

Not everything can be repaired, and we will tell you before we start. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before booking.

Surfaces we repair

  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays

Work for landlords and builders

We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.

For anyone letting property in or around Hart, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.

Where we work around Hart

Hart is about 2 miles north-west of Hartlepool, in County Durham. Across the TS27 area, we come to you. Hart is one of 329 towns and villages in County Durham we cover. Our jobs stretch from Hart to Newcastle upon Tyne (24 miles away).

We work across TS27. Streets in the area include Clevecoat Walk, Magdalene Drive and Front Street, and we cover them all. Close by, we cover Hart Station (1 mile east), West View (1 mile east), Elwick (2 miles south-west), High Throston (2 miles south-east) and West Park (2 miles south-east). We also work in nearby towns such as Durham (13 miles north-west), Newton Aycliffe (13 miles south-west), Spennymoor (13 miles west), Seaham (9 miles north), Peterlee (5 miles north-west) and Ferryhill (11 miles west).

Near you in Hart

Around Hart, we work in homes near Church of St Mary Magdalene, St Hild's Church of England Voluntary Aided School and Hart Primary School, among other places. Hart’s nearest station is Hartlepool station, about 3 miles south-east of the centre. Further afield, we also cover the area around University Hospital of Hartlepool (1.8 miles east) and Throston Rural (1.3 miles south-east).

Map of Hart © OpenStreetMap contributors

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Why choose Surface Doctor in Hart

  • Every repair guaranteed for a year
  • Repair technicians who travel to you, UK-wide
  • We’ll tell you if it’s not worth repairing
  • Free fixed quotes from pictures

Read our full price list.

Do you need non-slip bath coating in Hart?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Send us a photo if you notice any of these:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • What preparation is included
  • How your room will be protected
  • Whether the colour is mixed to match
  • What aftercare is recommended

Choosing a repair company

What affects the price in Hart

You’ll know the full cost before you book. We look at:

  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of
  • The colour and finish to match

A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from pictures

Almost every job we do is priced from pictures. This is what to send:

  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • A wider photo showing the whole bath or shower tray
  • Where you are, by postcode

The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

The process

You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It generally takes a few hours, and you can get on with other things while we’re there.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings

Getting a price

For a price in Hart, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Related advice

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.