Kent · England
Non-Slip Bath Coating for Harvel homes
Local non-slip bath coating for Harvel: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Non-slip bath coating in Harvel without replacing anything
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with resurfaced baths that are now too smooth and worn-out textured areas, we can help, on enamelled baths, acrylic baths and wet room floors (ask us) alike.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Harvel (DA13)
- Region
- Kent
- Cover
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Open a window if you can
Get a quote
Send us a photo of the damage and one of the whole item, and tell us you’re in Harvel, and we will come back with a fixed quote.
Related advice
Signs you need non-slip bath coating in Harvel
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
You may need us if you’ve spotted:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
What to look for in a quote
- How long the guarantee is and what it covers
- What prep work is covered
- What happens if the damage is worse than the pictures show
- How soon you can use it again
About Harvel
Harvel is about 6 miles south of Gravesend, in Kent. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Harvel is one of 922 places in Kent we cover. Our nearest city page is London, about 23 miles away.
Every address in DA13 is covered, from the main roads to the quietest streets. Local streets include St Francis Road, Hart Lane and Harvel Street, all of which we cover. Other places close to Harvel include Priestwood Green (1 mile north), Culverstone Green (1 mile south-west), Priestwood (1 mile north), South Street (1 mile north-west) and Vigo Village (1 mile south). Larger places within reach include Maidstone (9 miles south-east), Dartford (9 miles north-west), Sevenoaks (9 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north) and Tonbridge (11 miles south).
Landmarks near Harvel
Typical jobs here are in homes near Culverstone Green Primary School, Church of Our Lady of the Meadow and Meopham School. The closest station to Harvel is Sole Street station, about 2.7 miles north of the centre. Further afield, we also cover the area around Leybourne Castle (3.6 miles south-east) and Coldrum Long Barrow (1.6 miles south). Green spaces nearby include Ranscombe Farm.
FAQs for Harvel
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
Repairing versus replacing in Harvel
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
What you get with us
- We leave the room as we found it
- One price list for the whole UK
- Everything repaired in place
- Work done at your home or business
Read our full price list.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How we price non-slip bath coating
Prices are worked out job by job. The main factors are:
- Unusual colours or finishes
- How many areas need work
- Whether we combine several jobs
- The material
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- One picture of the entire bath or shower tray
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Also near Harvel
Other services in Harvel
About our accreditations · Every repair comes with a one-year guarantee.
