Oxfordshire · England

Non-slip bath & shower coating in Harwell, Oxfordshire

Clear non-slip coatings for baths and shower trays at your home in Harwell, with a one-year guarantee on every repair.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Harwell

Covering Harwell

Harwell is about 2 miles west of Didcot, in Oxfordshire. Whether you are in the middle of Harwell or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 443 places across Oxfordshire. You can also see our page for London, about 52 miles away.

Every address in OX11 is covered, from the main roads to the quietest streets. Local streets include High Street, Loder Road and The Styles, and we cover them all. We also cover the places around Harwell: West Hagbourne (2 miles south-east), Coscote (2 miles east), Upton (2 miles south-east), Chilton (2 miles south) and East Hagbourne (2 miles east). Further out, we also cover Oxford (11 miles north), Abingdon-on-Thames (5 miles north), Witney (15 miles north-west), Wantage (6 miles west), Grove (6 miles west) and Faringdon (13 miles west).

Local landmarks in Harwell

In Harwell, that means homes near Church of St Matthew, UTC Oxfordshire and The Crispin pub. Nearby too are UTC Oxfordshire (0.9 miles north-east) and Harwell Primary School (under half a mile west). The nearest railway station is Didcot Parkway station, roughly 2.3 miles east. Other landmarks nearby include Atlas Computer Laboratory (2 miles south-west) and Abingdon Community Hospital (4.8 miles north). Open spaces near Harwell include Churn Hill and Mowbray Fields.

Map of Harwell © OpenStreetMap contributors

Non-slip bath coating at your home in Harwell

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s resurfaced baths that are now too smooth and worn-out textured areas, we can typically put it right, whatever the material.

Every job is backed for twelve months. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Harwell (OX11)
Region
Oxfordshire
Warranty
12 months on all our work
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. We charge the same wherever you are, so there is no premium for Harwell. What changes the price is the job itself: how much damage, what it’s made of and how many items.

What you get with us

  • One visit for most repairs
  • No extra charge for your area
  • A fixed quote before you book
  • Everything repaired in place

Take a look at our full price list.

Your questions about non-slip bath coating in Harwell

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Do you cover the whole of Oxfordshire?

Across the UK, and that includes Harwell. Our prices are the same everywhere.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Can I get a quote without a visit?

Nearly always. If photos do not show enough, we’ll ask for another angle.

Honest limits

We will not take on work that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Prices and what affects them

Quotes are free and the price is fixed. What we look at:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • Doing more than one item at once
  • How hard the colour is to match

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your photos

Most quotes are done from photos alone. To help us price it:

  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • A photo taken from further back

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. What comes back is a fixed price, not a guess.

When to call us in Harwell

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Look out for any of the following:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people

Comparing quotes

  • Whether cleaning and preparation are in the price
  • If travel is included in the price
  • What protection goes down before work starts
  • Aftercare advice

Our hiring checklist

How the visit works

Arrival times are agreed in advance. Once we’re there, the work takes a morning or an afternoon for most jobs. The room is left tidy and ready to use once it has cured.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area

Ask for a price

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.