Derbyshire · England

Non-slip bath & shower coating in Heage, Derbyshire

Non-slip bath coating in Heage without the cost of replacing. Get a fixed quote from your pictures, then book a visit.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Heage?

Prices and what affects them

Each job gets its own fixed price. These are the things that affect it:

  • What kind of damage it is
  • Whether we combine several jobs
  • How easy the damage is to reach
  • Previous DIY repairs that have to come out

Our prices are the same across the UK, with no extra for Heage. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • What it’s made of, if you know
  • One sharp close-up of the damage

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Non-slip bath coating in Heage, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include worn-out textured areas and a bath or tray that is slippery when wet, across acrylic baths, shower trays and wet room floors (ask us).

Big or small, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Heage (DE56)
Area hub
Derbyshire
Warranty
12 months on all our work
Price
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

DIY kit or professional repair?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

Honest limits

To be straight with you, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Heage

  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths

Signs you need non-slip bath coating in Heage

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

These are the problems we’re asked about most:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Questions to ask before booking

  • Whether the price covers travel
  • What preparation is included
  • A fixed price, and whether VAT is included
  • When it can be used again

10 questions to ask before booking

Landlord and trade work in Heage

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.

Housing associations and facilities teams use us for planned and reactive repairs in Derbyshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

How it works

On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a morning or an afternoon, including clearing up.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Let us know about parking or access
  • Let us know which floor the room is on
  • Mention any earlier repairs or resurfacing

How to get a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

Get a fixed quote

Advice

Heage and nearby

Heage is about 2 miles north-east of Belper, in Derbyshire. From the centre of Heage to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 532 towns and villages across Derbyshire. Our nearest city page is Manchester, about 43 miles away.

All of DE56 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Bakers Hill, Tumbling Hill and Brook Street. You will find Heage on the B6374, which makes it straightforward to reach. Close by, we cover Upper Hartshay (1 mile east), Boothgate (1 mile south), Nether Heage (1 mile north-west), Morley Park (1 mile south-east) and Buckland Hollow (1 mile north). Within a short drive, we also cover Chesterfield (13 miles north), Ilkeston (8 miles south-east), Long Eaton (13 miles south-east), Heanor (5 miles south-east), Bolsover (14 miles north-east) and Staveley (15 miles north).

Around Heage

We visit homes around The White Hart pub, Church of St Luke and Belper School and Sixth Form Centre. The closest station to Heage is Ambergate station, about 1.6 miles north-west of the centre. Other landmarks nearby include Belper Urban District (1.8 miles south-west) and Strutt's North Mill (2.1 miles south-west). The countryside around Heage includes Alport Height and Wyver Lane Nature Reserve.

Map of Heage © OpenStreetMap contributors

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Why us?

  • Work done at your home or business
  • One price list for the whole UK
  • Straight answers about what a repair can do
  • Everything repaired in place

Read our full price list.

Heage: your questions answered

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you quote from pictures?

Nearly always. If photos do not show enough, we’ll ask for another angle.

Will the price change on the day?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Do you come to Heage?

Yes, we do. We send a technician to Heage for every job, with no extra charge for travel.

Can you redo someone else’s repair?

Normally, yes. The old repair comes out first.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Will there be a smell?

Some materials have a smell while they’re applied. It fades as everything cures.

Will I see the coating?

Very little: the treated area looks slightly matt.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.