Somerset · England

Non-slip bath & shower coating in Helland, Somerset

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Helland. Free, fixed quotes from your photos.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Helland

Non-slip bath coating in Helland without replacing anything

It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Common call-outs are for worn-out textured areas and resurfaced baths that are now too smooth, across shower trays, enamelled baths and resurfaced baths.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Helland (TA3)
County
Somerset
Warranty
12 months on all our work
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026

FAQs for Helland

Do you work in Helland?

Yes, we do. We send a technician to Helland for every job, and the price is the same as everywhere else.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will I see the coating?

Very little: the treated area looks slightly matt.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

What we are called out for in Helland

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The most common problems we are called about are:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • How the colour is matched
  • How changes to the job are handled

Our hiring checklist

Landlords, agents and businesses in Helland

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

What non-slip bath coating costs

Quotes are free and the price is fixed. What we look at:

  • Whether we combine several jobs
  • Access to the area
  • The material and finish
  • The colour and finish to match

We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

We price nearly every job from photos. This is what we need:

  • A picture taken from further back
  • Daylight if possible, and no flash reflection
  • Details of any past repairs
  • Your postcode, so we can check dates

Most clients in Helland get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Where we work around Helland

Helland is about 6 miles east of Taunton, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 640 places in Somerset, from the larger towns to small villages.

Here we cover the TA3 postcode area. Other places close to Helland include North Curry (1 mile west), Huntham (1 mile north-east), Lillesdon (2 miles west), Knapp (2 miles west) and Fivehead (2 miles south-east). Within a short drive, we also cover Taunton (6 miles west), Bridgwater (8 miles north), Yeovil (14 miles east), Chard (10 miles south), Burnham-on-Sea (15 miles north) and Wellington (12 miles west).

Landmarks near Helland

Typical jobs here are in homes near Church of St Peter & St Paul, Bird In Hand pub and North Curry CofE Primary School, among other places. Well-known places in the area include Willows and Wetlands Visitor Centre (1.9 miles north-east). For a walk, there is Swell Wood RSPB Nature Reserve and Burrow Mump.

Map of Helland © OpenStreetMap contributors

When a repair isn’t the answer

It helps to know what we can’t do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly before booking.

Surfaces we repair

  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why book with us

  • Repair technicians who travel to you, UK-wide
  • One price list for the entire UK
  • Rooms protected and left tidy
  • A fixed quote before booking

Read our pricing.

How the visit works

On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours, tidy-up included.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Point us to the nearest place to park
  • Tell us about parking, stairs or access

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a free quote

Read more

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.