Somerset · England
Bath re-enamelling & resurfacing in Helland, Somerset
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Helland. Send photos for a free, fixed quote.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our bath re-enamelling in Helland
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. We work on cast iron baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about lots of chips and rust spots and enamel that’s lost its shine and feels rough.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Helland (TA3)
- Region
- Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Helland
What else we do in Helland
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Don’t let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Helland and nearby
Helland is about 6 miles east of Taunton, in Somerset. Clients in Helland get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Helland is one of 640 towns and villages in Somerset where we work.
Every address in TA3 is within our area. We also travel to North Curry (1 mile west), Huntham (1 mile north-east), Lillesdon (2 miles west), Knapp (2 miles west) and Fivehead (2 miles south-east). Further out, we also cover Taunton (6 miles west), Bridgwater (8 miles north), Yeovil (14 miles east), Chard (10 miles south), Burnham-on-Sea (15 miles north) and Wellington (12 miles west).
Local landmarks in Helland
Our customers here include homes close to Church of St Peter & St Paul, Bird In Hand pub and North Curry CofE Primary School. A little further out are Willows and Wetlands Visitor Centre (1.9 miles north-east). The countryside around Helland includes Swell Wood RSPB Nature Reserve and Burrow Mump.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Helland. The price reflects:
- The type of damage
- The material
- How hard the colour is to match
- How many items we do on one visit
The price reflects the work involved, not where you live. You’ll see the full price before booking, with no extras added later.
Quotes from your photos
Most quotes are done from pictures alone. To help us price it:
- Your postcode, so we can check dates
- Any details about the material
- A close-up of the damage, in focus
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Common problems we fix in Helland
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Customers usually contact us about:
- Stains that won’t shift
- A coloured bath you want in white
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Questions to ask before you book
- How the colour is matched
- What the guarantee covers, and for how long
- Who turns up on the day
- What happens if the damage is worse than the pictures show
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Helland as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a full day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Point us to the nearest place to park
- Have a window or extractor fan available
- Clear the area around the damage
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Common questions in Helland
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
About our accreditations · Every repair comes with a one-year guarantee.
