Cheshire West and Chester · England
Non-slip bath & shower coating in Helsby, Cheshire West and Chester
We travel to Helsby for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Non-slip bath coating in Helsby without replacing anything
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Our repair technicians work on enamelled baths, acrylic baths and resurfaced baths, and the jobs we see most are resurfaced baths that are now too smooth and a bath or tray that is slippery when wet.
A one-year guarantee comes as standard, so you’re covered after the visit. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Helsby (WA6)
- County
- Cheshire West and Chester
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Helsby
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed any of these:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What your quote should include
- How the room is protected while they work
- What prep work is covered
- How soon you can use it again
- A fixed quote, and whether VAT is included
FAQs for Helsby
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
What we can’t put right
To be straight with you, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
Materials we work on in Helsby
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
How the visit works
We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and we leave the room as we found it.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price reflects the work involved, not where you live. You’ll see the full price before booking.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- A fixed quote before booking
- Rooms protected and left tidy
Read our prices page.
How we price non-slip bath coating
There’s no charge for travel to Helsby. The price comes down to:
- The type of damage
- What the surface is made of
- Any earlier repairs that need removing first
- Access to the area
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- A clear, close picture of the problem area
- A picture taken from further back
- A coin beside the damage so we can judge size
- Any details about the material
To get a price, send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Helsby and nearby
Helsby is about 5 miles south-west of Runcorn, in Cheshire West and Chester. We visit clients in Helsby and the surrounding area, so nothing has to leave your home. Helsby is one of 224 towns and villages in Cheshire West and Chester we cover. Our jobs stretch from Helsby to Liverpool (about 11 miles away).
We work across WA6 and the streets around it. Jobs here include addresses on Chester Road, Queens Drive and Lower Robin Hood Lane and the roads around them. We also cover the places around Helsby: Alvanley (1 mile south-east), Hapsford (1 mile south-west), Dunham-on-the-Hill (2 miles south-west), Buckoak (2 miles south-east) and Kingswood (2 miles east). Further out, we also cover Chester (7 miles south-west), Ellesmere Port (6 miles west), Winsford (11 miles south-east), Northwich (10 miles east), Neston (12 miles west) and Boughton (8 miles south-west).
Around Helsby
Locally, our jobs take us to homes close to St Paul's Church, Helsby High School and Helsby Hillside Primary School and the streets around them. There is a railway station in Helsby itself: Helsby station. Other landmarks nearby include Frodsham Castle (2.2 miles north-east) and Mouldsworth Motor Museum (2.8 miles south-east). For a walk, there’s Gowy Meadows Nature Reserve.
What else we do in Helsby
Landlord and trade work in Helsby
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
