Shropshire · England

Non-Slip Bath Coating for Hollinwood homes

Clear non-slip coatings for baths and shower trays at your home in Hollinwood, with a one-year guarantee on every repair.

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Hollinwood

Hollinwood: your questions answered

Do you work in Hollinwood?

Yes, we do. Technicians travel to Hollinwood from across the region, with no extra charge for travel.

Can you quote from photos?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Will I see the coating?

Very little: it shows as a matt area where you stand.

Do you charge for travel?

There is no separate call-out charge. Your fixed price includes everything.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Is a repair better than a new one?

Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Do you cover the whole of Shropshire?

All of Shropshire, and the rest of the UK. There’s no extra charge for travel.

How we handle non-slip bath coating in Hollinwood

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Our technicians work on wet room floors (ask us), enamelled baths and acrylic baths, and the jobs we see most are a bath or tray that is slippery when wet and resurfaced baths that are now too smooth.

All our work comes with our one-year guarantee, wherever you are in Shropshire. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Area
Hollinwood (SY13)
Region
Shropshire
Cover
12 months on all our work
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Landlords, agents and businesses in Hollinwood

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Prices and what affects them

We price every job individually. The main factors are:

  • The material and finish
  • The type of damage
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

How to get a fixed price

A couple of clear pictures is all it takes. Try to include:

  • A coin or ruler next to the damage for scale
  • A wider photo showing the whole bath or shower tray
  • Where you are, by postcode
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, add your postcode and send them to us. What comes back is a fixed price, not a guess.

When to call us in Hollinwood

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a picture:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

Questions to ask before you book

  • What prep work is covered
  • Whether the price is fixed and includes VAT
  • Who will actually do the work
  • Aftercare advice

Choosing a repair company

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

What you get with us

  • CHAS, Constructionline and SafeContractor accredited
  • Usually one visit, start to finish
  • One-year guarantee on every repair
  • We’ll tell you if it’s not worth repairing

Read our prices page.

How it works

Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and how to care for it.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Tell us if there are stairs or a lift
  • Clear toiletries, mats and anything else from around the area
  • Avoid using the area for a few hours before we arrive

Get a quote

If you’re in Hollinwood and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Related advice

Covering Hollinwood

Hollinwood is about 9 miles west of Market Drayton, in Shropshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in 433 places across Shropshire, from the larger towns to small villages. Our jobs stretch from Hollinwood to Liverpool (35 miles away).

We cover every part of the SY13 postcode area and the streets around it. Close by, we cover Stanley Green (1 mile south), Whixall (1 mile south), Bronington (3 miles north-west), Whitewell (3 miles north-west) and Bettisfield (4 miles west). Further out, we also cover Shrewsbury (15 miles south), Oswestry (15 miles west), Market Drayton (9 miles east), Coleham (15 miles south), Kingsland (15 miles south) and Whitchurch (4 miles north).

Near you in Hollinwood

Locally, our jobs take us to homes close to Church of St Mary and Whixall CofE Primary School. For rail, the closest station is Prees station, roughly 1.7 miles south-east. Further afield, we also cover the area around Soulton Hall Moat (3.9 miles south) and Whitchurch Community Hospital (3.9 miles north). Green spaces nearby include Prees Heath Common and Fenns Bank Works Pool 2.

Map of Hollinwood © OpenStreetMap contributors

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Shower trays
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Resurfaced baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.