County Durham · England
Non-slip bath & shower coating in Holmside, County Durham
Clear non-slip coatings for baths and shower trays in Holmside, carried out at your home and guaranteed for a year.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our non-slip bath coating in Holmside
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. If you are dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can help, on enamelled baths, acrylic baths and shower trays alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Holmside (DH7)
- Region
- County Durham
- Guarantee
- 12 months on all our work
- Price
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a morning or an afternoon. The room is left tidy and you will know when it can be used.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Point us to the nearest place to park
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
Towns and villages near Holmside
More services for Holmside
FAQs for Holmside
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
What information do you need?
Use the quote form or ring 0345 017 0787.
Do you cover the whole of County Durham?
We cover the entire UK, including Holmside and the rest of County Durham. Send your postcode with your photos and we’ll offer you dates.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
How do I get a price for non-slip bath coating in Holmside?
Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your DH7 postcode.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Common problems we fix in Holmside
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
People normally call us when they notice one of these:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Before you book anyone
- Whether the price is fixed and includes VAT
- When it can be used again
- What preparation is included
- Aftercare advice
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why Holmside customers choose us
- Honest advice, even when it means no job
- Fixed prices from your photos
- One visit for most repairs
- No need to remove anything
Take a look at our pricing.
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Enamelled baths
How we price non-slip bath coating
There is no charge for travel to Holmside. The price comes down to:
- The material and finish
- Unusual colours or finishes
- Access to the area
- How many areas need work
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
How to get a fixed quote
You can normally get a fixed quote without us visiting. To help us price it:
- A close-up of the damage, in focus
- Something in shot to show the size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Most customers in Holmside get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Holmside and the surrounding area
Holmside is about 3 miles south-east of Stanley, in County Durham. We visit clients in Holmside and nearby villages, so there is no workshop to go to. Holmside is one of 329 towns and villages in County Durham we cover. You can also see our page for Newcastle upon Tyne, about 11 miles away.
Every address in DH7 is within our area, from the main roads to the quietest streets. Whether you live on Holmside Lane, Ash Tree Terrace and Charlaw Lane or anywhere nearby, a technician can come to you. Other places close to Holmside include Edmondsley (1 mile east), Craghead (1 mile north), Sacriston (2 miles south-east), Witton Gilbert (2 miles south-east) and Grange Villa (2 miles north-east). Within a short drive, we also cover Durham (5 miles south-east), Consett (7 miles west), Newton Aycliffe (15 miles south), Bishop Auckland (13 miles south), Spennymoor (10 miles south) and Seaham (13 miles east).
Near you in Holmside
In Holmside, that means homes near Fyndoune Community College and the streets around them. The closest station to Holmside is Chester-Le-Street station, about 3.6 miles east. Further afield, we also cover the area around Ushaw Historic House (3.3 miles south) and Chester Le Street Hospital (3.6 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
