Devon · England

Non-Slip Bath Coating for Holne homes

Non-slip bath coating across Holne and nearby, normally in one visit and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Holne

About our non-slip bath coating in Holne

It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Whether it’s resurfaced baths that are now too smooth and safety for older or less mobile people, we can help, whatever the material.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Location
Holne (TQ13)
County
Devon
Cover
One year on every repair
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

When a repair is not the answer

We won’t take on work that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we repair

  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Acrylic baths

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Should you replace it?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why us?

  • One visit for most repairs
  • One-year guarantee on every repair
  • One price list for the whole UK
  • Technicians who travel to you, UK-wide

Take a look at our pricing.

Common questions in Holne

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

What if the damage is worse than the pictures show?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Do you work in Holne?

Yes, we do. Technicians travel to Holne from across the region, with no extra charge for travel.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

What non-slip bath coating costs

We price every job individually. What matters most is:

  • The colour and finish to match
  • What kind of damage it is
  • Access to the area
  • How many items we do on one visit

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • One sharp close-up of the damage

To get a price, send a couple of pictures using our quote form or ring us. We will say immediately whether it can be repaired.

Work for landlords and builders

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

How it works

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a few hours from start to finish. Before we go, we will explain how long to leave it and how to care for it.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

Before we arrive

  • Clear the area around the damage
  • Open a window if you can
  • Tell us about parking, stairs or access

Ask for a price

If you’re in Holne and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Send pictures for a quote

Advice

Where we work around Holne

Holne is about 10 miles west of Newton Abbot, in Devon. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Holne is one of 586 places in Devon where we work.

All of TQ13 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Scorriton (1 mile south), Buckfast (2 miles south-east), Buckland in the Moor (3 miles north-east), Buckfastleigh (3 miles south-east) and Ashburton (3 miles east). Further out, we also cover Newton Abbot (10 miles east), Teignmouth (15 miles east), Tavistock (14 miles west), Kingsteignton (11 miles east), Ivybridge (9 miles south-west) and Totnes (8 miles south-east).

Near you in Holne

Around Holne, we work in homes near Church of St Mary the Virgin and Church House Inn. Nearby you will also find Ashburton and Buckfastleigh Community Hospital (3.6 miles east) and The Pengelly Museum (3.1 miles south-east). The countryside around Holne includes Aish Tor.

Map of Holne © OpenStreetMap contributors

Signs you need non-slip bath coating in Holne

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Common reasons people in Holne contact us are:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people

Before booking anyone

  • When it can be used again
  • Who will actually do the work
  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.