East Riding of Yorkshire · England

Non-Slip Bath Coating in Hornsea

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Hornsea. Free, fixed quotes from your photos.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Hornsea homes

Your questions about non-slip bath coating in Hornsea

Are there extra charges for Hornsea?

We do not add a call-out fee. The fixed price covers the visit and the work.

Do you cover the whole of East Riding of Yorkshire?

Across the UK, and that includes Hornsea. Prices don’t change with location.

Will I see the coating?

Very little: the treated area looks slightly matt.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Can you repair something that is been repaired before?

In most cases. The old repair comes out first, so let us know about it.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

What does non-slip bath coating cost?

We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your HU18 postcode.

Non-slip bath coating in Hornsea, done in place

It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. If you’re dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can usually put it right, on enamelled baths, acrylic baths and wet room floors (ask us) alike.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Area
Hornsea (HU18)
County
East Riding of Yorkshire
Cover
12 months on all our work
Price
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Landlords, agents and businesses in Hornsea

We’re used to working with agents and managing companies. Send the address, pictures and access details.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

Repairing versus replacing in Hornsea

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Hornsea

  • CHAS and Constructionline accredited
  • Typically one visit, start to finish
  • One-year guarantee on every repair
  • Straight answers about what a repair can do

See our prices page.

Hornsea and the surrounding area

Hornsea is about 12 miles north-east of Beverley, in East Riding of Yorkshire. Across the HU18 area, we come to you. We cover 299 places across East Riding of Yorkshire, from the larger towns to small villages. Our jobs stretch from Hornsea to Leeds (57 miles away).

Jobs in HU18 are booked in the same way as anywhere else. That includes homes on Market Place, Newbegin and Willows Drive. Main roads around Hornsea include the A1035 and B1242, which makes travel easy. Nearby, we also work in Wassand (2 miles south-west), Atwick (2 miles north), Seaton (3 miles west), Mappleton (3 miles south-east) and Bewholme (3 miles north-west). Further out, we also cover Beverley (12 miles south-west), Bridlington (13 miles north), Driffield (13 miles north-west), Cottingham (14 miles south-west), Hedon (12 miles south) and Willerby (15 miles south-west). Hornsea is among the bigger towns we cover in East Riding of Yorkshire.

Around Hornsea

Around Hornsea, we work in homes near Church of Saint Nicholas, Hornsea Community Primary School and Hornsea School and Language College and the streets around them. A little further out are Hornsea Cottage Hospital (under half a mile north). The countryside around Hornsea includes Hornsea Mere.

Map of Hornsea © OpenStreetMap contributors

When a repair is not the answer

Some jobs are not right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before you book.

Surfaces we repair

  • Acrylic baths
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price is based on:

  • Unusual colours or finishes
  • Where the damage is and how we get to it
  • The type of damage
  • The size and number of damaged areas

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from photos

Before you send photos, these tips help us give you a firm price:

  • A wider photo showing the whole bath or shower tray
  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • Whether it’s been repaired or coated before

If you are in Hornsea and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

What happens on the day

We agree an arrival time beforehand. On site, it takes a few hours for most jobs. We leave the room clean and ready to use once it has cured.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

Preparing for the visit

  • Ensure the area is dry
  • Point us to the nearest place to park
  • Move bottles, mats and clutter away from the area

Get a quote

Upload pictures of the damage and a wider shot of the entire item, with your HU18 postcode, and we’ll reply with a fixed quote.

Send photos for a quote

Related advice

Can I fix it myself?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Common problems we fix in Hornsea

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The things customers typically mention when they call are:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Comparing quotes

  • Aftercare advice
  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • How long it needs to cure

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.