Slough · England
Non-slip bath & shower coating in Horton, Slough
Fixed-price non-slip bath coating in Horton and the surrounding area, typically in one visit.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth

Non-slip bath coating in Horton, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include resurfaced baths that are now too smooth and safety for older or less mobile people, across shower trays, resurfaced baths and enamelled baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

- Area
- Horton (SL3, TW19)
- Area hub
- Slough
- Cover
- A year, on every repair
- Quotes
- Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
- Enamelled baths
Horton: your questions answered
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
It’s been repaired before. Can you still fix it?
Usually, yes. We remove the old repair before doing a new one.
Do you charge for travel?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Horton customers choose us
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- We come to you, anywhere in the UK
Read our full price list.
What non-slip bath coating costs
We don’t charge extra for travel to Horton. The price comes down to:
- Access to the area
- What the surface is made of
- The type of damage
- How much damage there is
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Natural light rather than flash
- One sharp close-up of the damage
- Any details about the material
- Details of any past repairs
To get a price, send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.
What we do, step by step
We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and we leave the room as we found it.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.
Advice
Do you need non-slip bath coating in Horton?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for any of the following:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Questions to ask before you book
- How to care for the finish
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- What the guarantee covers, and for how long
Landlord and trade work in Horton
Landlords, letting agents and housing providers in Horton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Horton and the surrounding area
Horton is about 3 miles north of Egham, in Slough. We travel to clients in Horton, so there is no workshop to go to. We work in 31 places in Slough, from the larger towns to small villages. You can also see our page for London, about 19 miles away.
Every address in SL3 and TW19 is within our area. Jobs here include addresses on Stanwell Road, Bells Lane and Foundry Lane and the roads around them. We also cover the places around Horton: Brands Hill (1 mile north), Colnbrook (1 mile north-east), Sunnymeads (1 mile west), Poyle (1 mile north-east) and Wraysbury (1 mile south-west). Larger places within reach include Slough (4 miles north-west), Cippenham (5 miles north-west), Chalvey (4 miles north-west), Britwell (6 miles north-west), Upton (3 miles north-west) and Burnham (7 miles north-west).
Around Horton
Around Horton, we work in homes near Langley Grammar School, Arthur Jacob Nature Reserve and Colnbrook Church of England Primary School. Nearby too are Church of St Michael (less than half a mile west) and The Five Bells Public House (under half a mile west). Horton’s nearest station is Sunnymeads station, roughly 1 mile west of the centre. Other landmarks nearby include Upton Hospital (3.3 miles north-west) and Windsor Castle (3 miles west). Green spaces nearby include Staines Reservoirs.
Towns and villages near Horton
More services for Horton
About our accreditations · Every repair comes with a one-year guarantee.

