Angus · Scotland
Non-Slip Bath Coating in Hunter's Town
Clear non-slip coatings for baths and shower trays for homes and businesses in Hunter's Town and across Angus. Send pictures for a free, fixed quote.
- Safety for older or less mobile people
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
What affects the price in Hunter's Town
Prices are worked out job by job. What matters most is:
- Access to the area
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Getting a price from pictures
When you take your photos, these tips help us give you a firm price:
- Something in shot to show the size
- Natural light rather than flash
- Where you are, by postcode
- Whether it’s been repaired or coated before
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Non-slip bath coating in Hunter's Town, done in place
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, on enamelled baths, wet room floors (ask us) and acrylic baths.
A one-year guarantee comes as standard. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Hunter's Town (DD7)
- County
- Angus
- Cover
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Hunter's Town
Hunter's Town is about 1 mile west of Carnoustie, in Angus. Whether you are in the middle of Hunter's Town or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Hunter's Town is one of 40 places in Angus where we work. Our nearest city page is Edinburgh, about 43 miles away.
All of DD7 is within our area. From Barry Road, Lochend Road and Maclagan Road or anywhere nearby, a technician can come to you. Hunter's Town is on the A930, which makes it straightforward to reach. If you’re just outside Hunter's Town, we cover Gardynebourg (1 mile south-west), Carnoustie (1 mile east), Clayholes (1 mile north), Carlogie (1 mile north-east) and Barry (1 mile west). Larger places within reach include Arbroath (7 miles north-east), Forfar (12 miles north-west), Letham (9 miles north) and Friockheim (10 miles north). Hunter's Town is among the bigger towns we cover in Angus.
What’s near Hunter's Town
Typical jobs here are in homes near Carnoustie High School and Carnoustie Parish Church, among other places. Hunter's Town has its own railway station: Golf Street station. A little further out are Panmure Castle (2 miles north) and Ashludie Hospital (3.6 miles west).
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
Do you need non-slip bath coating in Hunter's Town?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Before booking anyone
- How the colour is matched
- What happens if they find more damage
- Aftercare advice
- Whether cleaning and preparation are in the price
When a repair is not the answer
It helps to know what we can’t do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Hunter's Town
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Questions from Hunter's Town
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Hunter's Town
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
Take a look at our pricing.
Towns and villages near Hunter's Town
What else we do in Hunter's Town
About our accreditations · Every repair comes with a one-year guarantee.
