Derbyshire · England

Non-Slip Bath Coating for Idridgehay homes

We travel to Idridgehay for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Idridgehay

About our non-slip bath coating in Idridgehay

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Whether it’s resurfaced baths that are now too smooth and safety for older or less mobile people, we can help, on enamelled baths, resurfaced baths and acrylic baths alike.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Area
Idridgehay (DE56)
County
Derbyshire
Guarantee
A year, on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

Do you need non-slip bath coating in Idridgehay?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Clients usually contact us about:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Questions to ask before booking

  • Whether they match the colour on site
  • What happens if the damage is worse than the photos show
  • Whether a trained technician does the job
  • How to look after the finish

Our hiring checklist

Idridgehay and the surrounding area

Idridgehay is about 4 miles west of Belper, in Derbyshire. We visit customers in Idridgehay and the surrounding area, so there’s no workshop to go to. Idridgehay is one of 532 towns and villages in Derbyshire we cover. Our nearest city page is Birmingham, about 41 miles away.

Jobs in DE56 are booked in the same way as anywhere else. We regularly work on streets such as Wirksworth Road, Ecclesbourne Lane and Cliffash Lane. Idridgehay is on the B5023, which makes it straightforward to reach. Other places close to Idridgehay include Ireton Wood (1 mile south-west), Hillclifflane (1 mile south), Turnditch (1 mile south), Shottle (2 miles east) and Cowers Lane (2 miles south-east). We also work in nearby towns such as Chesterfield (15 miles north), Ilkeston (12 miles east), Long Eaton (15 miles south-east), Belper (4 miles east), Heanor (9 miles east) and Ripley (7 miles east).

Near you in Idridgehay

Our customers here include homes close to Church of St James and the streets around them. The closest station to Idridgehay is Belper station, roughly 3.7 miles east. A little further out are Duffield Castle (4.4 miles south-east) and Strutt's North Mill (3.5 miles east). Green spaces nearby include Wyver Lane Nature Reserve and Alport Height.

Map of Idridgehay © OpenStreetMap contributors

Repairing versus replacing in Idridgehay

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Idridgehay

  • Same prices wherever you are
  • Work done at your home or business
  • Fixed prices from your pictures
  • One visit for most repairs

Take a look at our prices page.

Honest limits

Before you book, it’s worth knowing the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Acrylic baths
  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths

How we price non-slip bath coating

We give every job a fixed price from photos. These are the things that affect it:

  • The material and finish
  • Access to the area
  • The colour and finish to match
  • The type of damage

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Quotes from your photos

You can usually get a fixed price without us visiting. To make it quick:

  • Something in shot to show the size
  • The material, if you know it
  • Where you are, by postcode
  • A picture taken from further back

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

Landlords, agents and businesses in Idridgehay

Housing associations and facilities teams use us for planned and reactive repairs in Derbyshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

We work for landlords, letting agents and housing providers in Idridgehay as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

What happens on the day

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a few hours. We clean up when we are done and let you know when you can use it again.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area
  • Make sure the room can be ventilated

Ask for a price

If you are in Idridgehay and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed price

Read more

Common questions in Idridgehay

Which areas do you work in?

The whole UK, including all of Derbyshire. Send your postcode with your pictures and we’ll offer you dates.

When can you do it?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Are there extra charges for Idridgehay?

Travel is included in the price, with the same prices everywhere we work.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

How much does non-slip bath coating cost in Idridgehay?

Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your DE56 postcode.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one, so mention it when you send photos.

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.