Derbyshire · England
Non-Slip Bath Coating in Shottle
We travel to Shottle for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Non-slip bath coating in Shottle without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our repair technicians work on wet room floors (ask us), shower trays and enamelled baths, and the jobs we see most are a bath or tray that is slippery when wet and safety for older or less mobile people.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Shottle (DE56)
- County
- Derbyshire
- Guarantee
- One year on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Shottle
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
The things clients typically mention when they call include:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
Before you book anyone
- How the colour is matched
- What happens if the damage is worse than the pictures show
- What prep work is covered
- What the guarantee covers, and for how long
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly.
Surfaces we repair
- Resurfaced baths
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
Towns and villages near Shottle
Also in Shottle
For landlords and businesses
Landlords, letting agents and housing providers in Shottle use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
For anyone letting property in or around Shottle, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Should you replace it?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
- CHAS and Constructionline accredited
- One-year guarantee on every repair
Take a look at our full price list.
Your questions about non-slip bath coating in Shottle
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Do you cover the entire of Derbyshire?
We cover the entire UK, including Shottle and the rest of Derbyshire. Just include your postcode and we’ll confirm dates.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
How the visit works
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Ensure the area is dry
- Open a window if you can
- Let us know which floor the room is on
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
What affects the price in Shottle
You will know the full cost before you book. We take into account:
- How hard the colour is to match
- The type of damage
- Previous DIY repairs that have to come out
- How many areas need work
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A wider photo showing the whole bath or shower tray
- A clear, close picture of the problem area
Send us photos of the damage and one of the entire item, with your DE56 postcode, and we will come back with a fixed quote.
Shottle and the surrounding area
Shottle is about 3 miles west of Belper, in Derbyshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Shottle is one of 532 towns and villages in Derbyshire where we work. Our jobs stretch from Shottle to Manchester (about 41 miles away).
Jobs in DE56 work the same way as everywhere else we cover. Other places close to Shottle include Belper Lane End (1 mile east), Cowers Lane (1 mile south), Shottlegate (1 mile south), Blackbrook (1 mile south-east) and Idridgehay (2 miles west). Within a short drive, we also cover Chesterfield (14 miles north), Ilkeston (11 miles south-east), Long Eaton (15 miles south-east), Belper (3 miles east), Heanor (8 miles east) and Ripley (6 miles east).
Local landmarks in Shottle
Our clients here include homes close to St Lawrence and the streets around them. For rail, the closest station is Belper station, roughly 2.5 miles south-east of the centre. A little further out are Babington Hospital (2.6 miles south-east) and Belper Urban District (2.7 miles east). For a walk, there is Alport Height and Wyver Lane Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
