West Sussex · England

Non-Slip Bath Coating for Ifold homes

Non-slip bath coating for Ifold, without a refit. Send us photos for a fixed price, then book a visit.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Ifold

How the visit works

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before
  • Mention if the room is upstairs or in a flat

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.

Get a free quote

Advice

How we handle non-slip bath coating in Ifold

It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with worn-out textured areas and bath mats that harbour mould or get forgotten, we can generally put it right.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Where
Ifold (RH14)
County
West Sussex
Warranty
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Your questions about non-slip bath coating in Ifold

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What does non-slip bath coating cost?

Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.

Do you cover the entire of West Sussex?

Everywhere in the UK, Ifold included. There’s no extra charge for travel.

Do you cover Ifold?

Yes, we do. Technicians travel to Ifold from across the region, with no extra charge for travel.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

How we price non-slip bath coating

You will not pay by the hour. The price is based on:

  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work
  • Whether old repairs or coatings need taking off

We charge the same wherever you are, so there’s no premium for Ifold. The job itself decides the price: the material, the amount of damage and how many items.

Send photos for a quote

Good pictures mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode
  • Any details about the material
  • A coin or ruler next to the damage for scale

Upload pictures of the damage and one of the entire item, with your RH14 postcode, and we’ll reply with a fixed price.

Repairing versus replacing in Ifold

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why Ifold clients choose us

  • We leave the room as we found it
  • One visit for most repairs
  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited

Read our full price list.

Landlord and trade work in Ifold

If you manage property in Ifold, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

About Ifold

Ifold is about 9 miles west of Horsham, in West Sussex. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Ifold is one of 371 towns and villages in West Sussex where we work. Our nearest city page is London, about 35 miles away.

We cover every part of RH14. From Birchwood Close, The Drive and Wildacre Close or anywhere nearby, we can come to you. Close by, we cover Loxwood (1 mile north-east), Plaistow (1 mile west), Alfold Bars (2 miles north-east), Mackerel's Common (2 miles south) and Durfold Wood (2 miles north-west). We also work in nearby towns such as Crawley (15 miles east), Horsham (9 miles east), Broadfield (14 miles east), Storrington (11 miles south), Billingshurst (5 miles south-east) and Bewbush (14 miles east).

Around Ifold

Locally, our jobs take us to homes close to Loxwood Primary School and St John the Baptist, among other places. For a walk, there is Shillinglee Lake.

Map of Ifold © OpenStreetMap contributors

When to call us in Ifold

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Keep an eye out for these signs:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

Before you book anyone

  • Whether there are any call-out or travel charges
  • How the colour is matched
  • How long the guarantee is and what it covers
  • Who turns up on the day

How to compare quotes

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.