Dorset · England
Non-Slip Bath Coating for Kinson homes
Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Kinson. Send pictures for a free, fixed quote.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
What we’re called out for in Kinson
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
What your quote should include
- What protection goes down before work starts
- What the guarantee covers, and for how long
- What aftercare is recommended
- How changes to the job are handled
Non-slip bath coating in Kinson, done in place
It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Typical jobs include resurfaced baths that are now too smooth and worn-out textured areas, in acrylic baths, shower trays and wet room floors (ask us).
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Kinson (BH10, BH11)
- Region
- Dorset
- Warranty
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Kinson
What else we do in Kinson
What affects the price in Kinson
You’ll know the full cost before you book. We look at:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- How many areas need work
We charge the same wherever you are, so there is no premium for Kinson. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any details about the material
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One picture of the whole bath or shower tray
If you are in Kinson and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Kinson and the surrounding area
Kinson is about 2 miles south of Ferndown, in Dorset. Our repair technicians come to homes and businesses in Kinson and the surrounding area, so nothing has to leave your home. We cover all 462 towns and villages in Dorset, from the larger towns to small villages.
Postcode districts we cover here: BH10 and BH11. Whether you live on Home Road, Hyde Road and Lake Road or a nearby road, a technician can come to you. Being close to the A341, Kinson is easy for our technicians to reach. Close by, we cover West Howe (1 mile south-west), Longham (1 mile north), Bearwood (1 mile west), Knighton (1 mile north-west) and Knighton Heath (2 miles south-west). Further out, we also cover Christchurch (7 miles east), Wimborne Minster (4 miles north-west), Blandford Forum (13 miles north-west), Verwood (7 miles north), Broadstone (4 miles west) and Corfe Mullen (5 miles west).
Landmarks near Kinson
Our customers here include homes close to Kinson Academy, LeAF Studio and LeAF Studio, among other places. Other local landmarks include Church of St Andrew (less than half a mile north-west) and Fernheath Playing Fields (1 mile south). The nearest railway station is Branksome station, about 3 miles south. Nearby you will also find Alderney Hospital (2.1 miles south-west) and Castlepoint Shopping Centre (2.9 miles south-east). The countryside around Kinson includes St Catherine's Hill.
Repair or replace in Kinson?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- We come to you, anywhere in the UK
- One visit for most repairs
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
Read our pricing.
Landlords, agents and businesses in Kinson
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
Kinson: your questions answered
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Do you cover the whole of Dorset?
All of Dorset, and the rest of the UK. Travel is included in the price.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens on the day
Here’s how a visit normally runs: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- We leave it to cure, generally overnight.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Related advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
