Gloucestershire · England
Non-Slip Bath Coating in Knave-in-hole
Non-slip bath coating in Knave-in-hole without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Non-slip bath coating at your home in Knave-in-hole
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for safety for older or less mobile people and a bath or tray that is slippery when wet, on enamelled baths, resurfaced baths and acrylic baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Knave-in-hole (GL5)
- Region
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
It helps to know what we can’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
What we work on
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Enamelled baths
- Resurfaced baths
When to call us in Knave-in-hole
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
What to look for in a quote
- Who turns up on the day
- How long the guarantee is and what it covers
- How to look after the finish
- How the colour is matched
Towns and villages near Knave-in-hole
What else we do in Knave-in-hole
Knave-in-hole and nearby
Knave-in-hole is about 3 miles south-east of Stroud, in Gloucestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Knave-in-hole is one of 470 places in Gloucestershire we cover. We work right across the region, from Knave-in-hole to Birmingham (54 miles away).
We cover every part of the GL5 postcode area. If you are just outside Knave-in-hole, we cover Brimscombe (1 mile west), Brownshill (1 mile north-east), Minchinhampton (1 mile south-west), Bussage (1 mile north-east) and Far Thrupp (1 mile north-west). Larger places within reach include Cheltenham (13 miles north), Gloucester (10 miles north), Stroud (3 miles north-west), St Paul's (14 miles north), Cirencester (9 miles east) and Lansdown (13 miles north).
Landmarks near Knave-in-hole
Our clients here include homes close to St Mary of the Angels Church, Neu-Lindsey Nature Reserve and Thomas Keble School and the streets around them. Other local landmarks include Brimscombe Church of England (VA) Primary School (0.5 miles west) and The Ship Inn (0.6 miles west). For rail, the closest station is Stroud station, about 2.6 miles north-west. Well-known places in the area include Stroud General Hospital (2.2 miles north-west) and Arcade Archive (0.7 miles north-east). Not far away are Frome Banks.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- One price list for the entire UK
- We come to you, anywhere in the UK
- One visit for most repairs
- Nothing taken out or refitted
Take a look at our pricing.
FAQs for Knave-in-hole
Do you come to Knave-in-hole?
Yes. We cover the whole UK and come to Knave-in-hole. Send us photos for a fixed quote, or call 0345 017 0787.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
How do I get a price for non-slip bath coating in Knave-in-hole?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How we price non-slip bath coating
You won’t pay by the hour. The price is based on:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
You can take the pictures on your phone. Ensure they show:
- Where you are, by postcode
- Any earlier repairs or coatings
- The material, if you know it
- A wider photo showing the entire bath or shower tray
Most customers in Knave-in-hole get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow a few hours, and we will tell you if anything changes.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
Get a quote
Send us pictures of the damage and a wider shot of the whole item, with your GL5 postcode, and we will come back with a fixed quote.
Read more
Landlords, agents and businesses in Knave-in-hole
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
