Na h-Eileanan Siar · Scotland

Non-slip bath & shower coating in Knock, Na h-Eileanan Siar

Local non-slip bath coating for Knock: photo quotes, tidy work and a year’s guarantee.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Knock

Do you need non-slip bath coating in Knock?

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Common reasons people in Knock contact us are:

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • How long the guarantee is and what it covers
  • How your room will be protected
  • What prep work is covered
  • How the colour is matched

Our hiring checklist

Non-slip bath coating at your home in Knock

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. We are frequently asked to fix a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, across resurfaced baths, wet room floors (ask us) and shower trays.

Whatever the size of the job, you get the same one-year guarantee in Knock and across Na h-Eileanan Siar. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Where
Knock (HS2)
Region
Na h-Eileanan Siar
Cover
One year on every repair
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

Knock questions

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What does non-slip bath coating cost?

We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.

What areas do you cover?

We cover the whole UK, including Knock and the rest of Na h-Eileanan Siar. Send your postcode with your photos and we will offer you dates.

Can I add another job to the visit?

Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.

Should you replace it?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

What you get with us

  • A year’s guarantee on all work
  • Free fixed quotes from pictures
  • Most jobs done in one visit
  • CHAS and Constructionline accredited

Read our full price list.

How we price non-slip bath coating

A fixed quote means you know the cost before booking. We take into account:

  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • Doing more than one item at once
  • How many areas need work

We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

Two or three clear photos are normally enough. Try to include:

  • One picture of the whole bath or shower tray
  • The material, if you know it
  • Details of any past repairs
  • Your postcode, so we can check dates

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

When a repair isn’t the answer

A repair isn’t always the answer, and we would rather say so up front. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think.

Materials we work on in Knock

  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Acrylic baths

Landlords, agents and businesses in Knock

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Knock and nearby

Knock (Gaelic: An Cnoc) is in Na h-Eileanan Siar. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 87 places across Na h-Eileanan Siar.

We cover every part of HS2 and the streets around it. Local streets include Seaview and A' Chnuic, and we cover them all. With the A866 close by, Knock is easy for our repair technicians to reach. If you are just outside Knock, we cover Na h-Eileanan an Iar (1 mile west), Aiginis (1 mile west), Lower Bayble (1 mile east), Garrabost (2 miles north-east) and Pabail Uarach (2 miles east). Remote and island addresses take a little more planning, so call us to arrange it.

Near you in Knock

We visit homes around Sgoil an Rubha and Lewis and the streets around them. Further afield, we also cover the area around Western Isles Hospital (4.5 miles west).

Map of Knock © OpenStreetMap contributors

How the visit works

Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a few hours in most cases. The room is left tidy and you’ll know when it can be used.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Have a window or extractor fan available
  • Tell us if there are stairs or a lift
  • Plan for the room to be out of bounds to pets and children

Getting a price

For a price in Knock, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Advice

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.