Highland · Scotland
Non-Slip Bath Coating for Kyleakin homes
Non-slip bath coating in and around Kyleakin: a fixed quote from photos, a tidy visit and a one-year guarantee.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
What affects the price in Kyleakin
Prices are worked out job by job, from your photos. What matters most is:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- Your postcode, so we can check dates
- One picture of the entire bath or shower tray
- Any earlier repairs or coatings
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Non-slip bath coating at your home in Kyleakin
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We are frequently asked to fix a bath or tray that is slippery when wet and worn-out textured areas, on wet room floors (ask us), shower trays and acrylic baths.
Every repair comes with a one-year guarantee, wherever you are in Highland. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Kyleakin (IV41)
- Area hub
- Highland
- Cover
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
It helps to know what we cannot do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Shower trays
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
Repair or replace in Kyleakin?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- Straight answers about what a repair can do
See our pricing.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Kyleakin, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Covering Kyleakin
Kyleakin (Gaelic: Caol Acain) is in Highland. Across the IV41 area, a technician comes to you. We cover all 253 towns and villages in Highland, from the larger towns to small villages.
We cover every part of the IV41 postcode area and the streets around it. We regularly work on streets such as Achmore Road, Olaf Road and Kyleside. Other places close to Kyleakin include Kyle of Lochalsh (1 mile north-east), Erbusaig (2 miles north), Drumbuie (3 miles north-east), Balmacara (4 miles east) and Reraig (4 miles east). Remote and island addresses take a little more planning, so call us to arrange it.
Landmarks near Kyleakin
We visit homes around Skye and the streets around them. Kyleakin’s nearest station is Kyle of Lochalsh station, roughly 1 mile north-east. Further afield, we also cover the area around Bright Water Visitor Centre (less than half a mile east). For a walk, there’s Loch an t-Seachrain.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
What else we do in Kyleakin
Questions from Kyleakin
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you work in Kyleakin?
Yes. We cover the entire UK and travel to Kyleakin and the rest of Highland. Send us photos for a fixed quote, or call 0345 017 0787.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
How do I get a price for non-slip bath coating in Kyleakin?
Because every job differs, we price from photos. You will get a fixed figure before booking.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Signs you need non-slip bath coating in Kyleakin
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Kyleakin contact us include:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
Comparing quotes
- How long the guarantee is and what it covers
- Aftercare advice
- How long it needs to cure
- How changes to the job are handled
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and we leave the room as we found it.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
Getting a price
To get a price, send a couple of photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
