Nottinghamshire · England

Non-slip bath & shower coating in Langwith, Nottinghamshire

Clear non-slip coatings for baths and shower trays for homes and businesses in Langwith and across Nottinghamshire. Send photos for a free, fixed quote.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Langwith?

Non-slip bath coating in Langwith without replacing anything

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, we can typically put it right.

Every job is backed for twelve months in Langwith and everywhere else. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Stained shower tray resurfaced to clean white, before and after
Area
Langwith (NG20)
Region
Nottinghamshire
Cover
One year on every repair
Price
Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

Work for landlords and builders

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Send the address, photos and access details.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Repairing versus replacing in Langwith

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in Langwith

  • Usually one visit, start to finish
  • A year’s guarantee on all work
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited

Read our pricing.

Langwith and the surrounding area

Langwith is about 3 miles east of Bolsover, in Nottinghamshire. Anywhere in NG20, we come to you. We work in all 329 towns and villages in Nottinghamshire, from the larger towns to small villages. Our jobs stretch from Langwith to Leeds (about 43 miles away).

Here we cover the NG20 postcode area. From Poulter Street, Main Road and Stone Grove or a nearby road, a technician can come to you. Neighbouring places we cover include Whaley Thorns (1 mile north), Nether Langwith (1 mile south), Upper Langwith (1 mile south-west), Langwith Junction (1 mile south) and Whaley (1 mile north-west). Further out, we also cover Mansfield (6 miles south), Worksop (7 miles north-east), Sutton in Ashfield (7 miles south), Hucknall (13 miles south), Retford (13 miles north-east) and Mansfield Woodhouse (4 miles south).

Near you in Langwith

Locally, our jobs take us to homes close to Whaley Thorns Primary School, St Luke and The Jug And Glass Inn and the streets around them. There’s a railway station in Langwith itself: Langwith - Whaley Thorns station. Further afield, we also cover the area around Norton and Cuckney (2.5 miles east) and Bolsover Hospital (3 miles west).

Map of Langwith © OpenStreetMap contributors

What a repair cannot fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before booking.

Surfaces we repair

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths

What non-slip bath coating costs

Every quote is fixed and free. What we take into account:

  • Whether it’s a chip, crack, burn or wear
  • What the surface is made of
  • How much damage there is
  • Unusual colours or finishes

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Getting a price from photos

Photographing the damage takes a minute. Try to send:

  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare
  • What it’s made of, if you know

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.

Your questions about non-slip bath coating in Langwith

Can you quote from pictures?

Nearly always. If photos don’t show enough, we’ll ask for another angle.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How do I book?

Photos of the damage, a picture of the entire bath or shower tray and your postcode. After that, we just agree a date.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders.

How do I get a price for non-slip bath coating in Langwith?

Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.

Signs you need non-slip bath coating in Langwith

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

The things clients generally mention when they call are:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

What your quote should include

  • What protection goes down before work starts
  • What aftercare is recommended
  • If travel is included in the price
  • What the guarantee covers, and for how long

10 questions to ask before booking

What we do, step by step

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a few hours. At the end we talk you through the curing time and the aftercare.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing

How to get a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Send photos for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.