Warwickshire · England
Non-slip bath & shower coating in Lighthorne, Warwickshire
Clear non-slip coatings for baths and shower trays in Lighthorne, carried out at your home and guaranteed for a year.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Lighthorne without replacing anything
It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Typical jobs include resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, in shower trays, wet room floors (ask us) and enamelled baths.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Lighthorne (CV35)
- Area hub
- Warwickshire
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price non-slip bath coating
Every quote is fixed and free. What we take into account:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The material and finish
We charge the same wherever you are, with no extra for Lighthorne. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- The material, if you know it
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. What comes back is a fixed price, not a guess.
How it works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, typically overnight.
How to prepare
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
- Mention any parking restrictions or tricky access
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Landlord and trade work in Lighthorne
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
When to call us in Lighthorne
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Most people contact us after spotting one of these:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What your quote should include
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- Whether there are any call-out or travel charges
- What prep work is covered
Lighthorne and nearby
Lighthorne is about 6 miles south-east of Warwick, in Warwickshire. Anywhere in CV35, we carry out the work at your property. We work in all 324 towns and villages across Warwickshire, from the larger towns to small villages. You can also see our page for Birmingham, about 25 miles away.
Our technicians cover all of CV35 and the streets around it. That includes homes on Post Office Lane, Mountford Rise and The Bank and the roads around them. Neighbouring places we cover include Compton Verney (2 miles south-west), Kineton (3 miles south), Combrook (3 miles south-west), Little Kineton (3 miles south) and Walton (4 miles south-west). Within a short drive, we also cover Warwick (6 miles north-west), Royal Leamington Spa (6 miles north), Stratford-upon-Avon (9 miles west), Leamington Spa (7 miles north), Kenilworth (10 miles north) and Southam (6 miles north-east).
Local landmarks in Lighthorne
Typical jobs here are in homes near Lighthorne Heath Primary School and Church of St Lawrence. Other landmarks nearby include Royal Leamington Spa Rehabilitation Hospital (5 miles north) and British Motor Museum (1.3 miles south-east). Not far away are Harbury Spoilbank.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Lighthorne
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- One-year guarantee on every repair
Take a look at our full price list.
Towns and villages near Lighthorne
Also in Lighthorne
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Your questions about non-slip bath coating in Lighthorne
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What we cannot put right
In fairness, some problems need a different fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Resurfaced baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
About our accreditations · Every repair comes with a one-year guarantee.
