Falkirk · Scotland

Non-Slip Bath Coating in Limerigg

Our technicians come to Limerigg for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Limerigg?

How we handle non-slip bath coating in Limerigg

The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We work on shower trays, wet room floors (ask us) and acrylic baths, and common reasons people contact us are worn-out textured areas and resurfaced baths that are now too smooth.

All our work comes with a one-year guarantee, wherever you are in Falkirk. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Limerigg (FK1)
Region
Falkirk
Cover
One year on every repair
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

Prices and what affects them

We charge the same across the UK, including Limerigg. What changes the price is:

  • Whether it’s a chip, crack, burn or wear
  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • The size and number of damaged areas

A repair is priced on what needs doing, not your postcode. You will see the full price before booking.

Getting a price from photos

Most quotes are done from photos alone. To make it quick:

  • One picture of the whole bath or shower tray
  • Your postcode, so we can check dates
  • Any details about the material
  • Daylight if possible, and no flash reflection

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job without visiting.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

Why repair rather than replace?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • Every repair guaranteed for a year
  • Rooms protected and left tidy
  • One price list for the whole UK
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our full price list.

Our work in Limerigg

Limerigg is about 6 miles south of Falkirk, in Falkirk. Jobs in Limerigg are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover 50 places in Falkirk, from the larger towns to small villages. We work right across the region, from Limerigg to Glasgow (18 miles away).

Our visits in FK1 are booked in the same way as anywhere else. Other places close to Limerigg include Binniehill (1 mile north), Slamannan (1 mile north), Longriggend (2 miles west), Tamfourhill (6 miles north) and Bantaskin (6 miles north). Within a short drive, we also cover Falkirk (6 miles north), Grangemouth (8 miles north-east), Bo'ness (11 miles north-east), Larbert (8 miles north), Stenhousemuir (8 miles north) and Denny (8 miles north-west).

Local landmarks in Limerigg

The nearest railway station is Caldercruix station, about 3 miles south-west of the centre. Further afield, we also cover the area around Wester Moffat Hospital (5.4 miles south-west) and Blackridge Community Museum (3.5 miles south-east). Open spaces near Limerigg include Black Loch.

Map of Limerigg © OpenStreetMap contributors

What we do, step by step

Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. It normally takes a morning or an afternoon, and we’ll keep you posted as we go.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, generally overnight.

How to prepare

  • Tell us about any previous repairs or coatings
  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed quote, not an estimate.

Send photos for a quote

Advice

Questions from Limerigg

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Is a repair better than a new one?

Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Can you quote from pictures?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we will plan for it.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Common problems we fix in Limerigg

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a photo:

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • What happens if the damage is worse than the pictures show
  • When it can be used again
  • Aftercare advice
  • Whether a trained technician does the job

Choosing a repair company

Honest limits

We will always be straight with you, so here’s what a repair won’t do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer before booking.

Materials we repair

  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Enamelled baths
  • Acrylic baths

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.