Kent · England

Non-Slip Bath Coating for Lodge Lees homes

Clear non-slip coatings for baths and shower trays in Lodge Lees, carried out at your home and guaranteed for a year.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Lodge Lees

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

What you get with us

  • Work done at your home or business
  • Everything repaired in place
  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit

See our full price list.

Non-slip bath coating in Lodge Lees, done in place

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We regularly repair resurfaced baths, acrylic baths and wet room floors (ask us), and people most frequently call us about safety for older or less mobile people and a bath or tray that is slippery when wet.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Where
Lodge Lees (CT4)
Area hub
Kent
Guarantee
A year, on every repair
Quotes
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What affects the price in Lodge Lees

You will know the full cost before booking. We take into account:

  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.

Quotes from your photos

Phone pictures are fine, there’s no need for anything special. Ensure they show:

  • Something in shot to show the size
  • A picture taken from further back
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Where we work around Lodge Lees

Lodge Lees is about 7 miles north-west of Dover, in Kent. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 922 places across Kent. Our nearest city page is London, about 58 miles away.

Every address in CT4 is covered, from the main roads to the quietest streets. We also cover the places around Lodge Lees: Denton (1 mile east), Breach (1 mile west), Wootton (1 mile south-east), Shelvin (1 mile east) and Selsted (2 miles south). Within a short drive, we also cover Ashford (13 miles west), Canterbury (7 miles north-west), Dover (7 miles south-east), Folkestone (7 miles south), Ramsgate (15 miles north-east) and Whitstable (13 miles north-west).

Around Lodge Lees

Typical jobs here are in homes near Jumping Downs, The Jackdaw Inn and Church of St Mary Magdalene and the streets around them. The closest station to Lodge Lees is Shepherds Well station, about 3 miles east of the centre. The countryside around Lodge Lees includes Cheriton Hill.

Map of Lodge Lees © OpenStreetMap contributors

How it works

Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take a few hours, and we’ll tell you if anything changes.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

Preparing for the visit

  • Let us know if it has been repaired before
  • Open a window if you can
  • Clear toiletries, mats and anything else from around the area

Getting a price

To get a price, send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.

Get a free quote

Advice

Honest limits

In fairness, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

What we work on

  • Shower trays
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths

Questions from Lodge Lees

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will I see the coating?

Very little: it shows as a matt area where you stand.

Is my repair covered?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Signs you need non-slip bath coating in Lodge Lees

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Signs it’s time to call us include:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people

Questions to ask before booking

  • What prep work is covered
  • If travel is included in the price
  • How your room will be protected
  • Whether the colour is mixed to match

Choosing a repair company

Work for landlords and builders

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.