Kent · England

Non-Slip Bath Coating for Dover homes

Clear non-slip coatings for baths and shower trays in Dover, carried out at your home and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Dover

Dover and nearby

Dover is in Kent. Jobs in Dover are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover 922 places in Kent, from the larger towns to small villages. You can also see our page for London, about 65 miles away.

We work across CT17, CT16, CT15 and CT14. Streets in the area include London Road, High Street and Church Road, and we cover them all. With the A2 and A20 close by, Dover is easy for our repair technicians to reach. If you are just outside Dover, we cover River (1 mile north-west), Maxton (1 mile south), Kearsney (1 mile north-west), Whitfield (1 mile north) and Temple Ewell (2 miles north-west). We also work in nearby towns such as Canterbury (14 miles north-west), Folkestone (7 miles south-west), Ramsgate (15 miles north), Deal (7 miles north-east), Hythe (11 miles south-west) and Walmer (6 miles north-east). Being one of Kent’s larger places, Dover is somewhere we visit frequently.

Local landmarks in Dover

Typical jobs here are in homes near Parish Church of St Andrew Buckland, Connaught Park and St Edmund's Catholic School, among other places. Other local landmarks include Shatterlocks Infant School (within half a mile north-west), The Bull pub (under half a mile south-west) and St Edmund's Catholic School (under half a mile south-east). For rail, the closest station is Dover Priory station, about 0.9 miles south of the centre. Other landmarks nearby include Dover Castle (1.3 miles south-east) and Crabble Corn Mill (0.7 miles west). Open spaces near Dover include Dover Western Heights.

Map of Dover © OpenStreetMap contributors

How we handle non-slip bath coating in Dover

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We regularly repair resurfaced baths, shower trays and enamelled baths, and the jobs we see most are bath mats that harbour mould or get forgotten and worn-out textured areas.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Dover (CT17, CT16, CT15, CT14)
County
Kent
Warranty
One year on every repair
Quotes
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Landlords, agents and businesses in Dover

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.

What affects the price in Dover

There’s no charge for travel to Dover. The price depends on:

  • The material
  • Where the damage is and how we get to it
  • Whether we combine several jobs
  • The type of damage

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed quote

When you take your photos, these tips help us give you a firm price:

  • A photo taken from further back
  • A clear, close picture of the problem area
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Signs you need non-slip bath coating in Dover

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted any of these:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • Whether cleaning and preparation are in the price
  • How long the guarantee is and what it covers
  • How long it needs to cure
  • What happens if they find more damage

Choosing a repair company

What we do, step by step

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Keep pets and children out of the room while we work
  • Ensure the area is dry

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Get a fixed price

Advice

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we work on in Dover

  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths

FAQs for Dover

Is there any odour?

There may be a mild smell during the work.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders.

What happens if you find more damage?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Do you charge for travel?

We don’t add a call-out fee. The fixed price covers the visit and the work.

Is a repair better than a new one?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

How do I clean it?

Yes. A soft brush and mild cleaner is all it needs.

Why repair rather than replace?

The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.

What you get with us

  • Honest advice, even when it means no job
  • Work done at your home or business
  • A fixed quote before you book
  • We leave the room as we found it

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.