Bradford · England
Non-slip bath & shower coating in Low Springs, Bradford
Fixed-price non-slip bath coating in Low Springs and the surrounding area, done in a single visit in most cases.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth

Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Low Springs clients choose us
- Every repair guaranteed for a year
- No extra charge for your area
- Rooms protected and left tidy
- A fixed quote before booking
See our pricing.
Non-slip bath coating at your home in Low Springs
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s safety for older or less mobile people and worn-out textured areas, we can help, whatever the material.
You get a one-year guarantee, the same in Low Springs as everywhere else we work. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Low Springs (BD17, LS20)
- County
- Bradford
- Warranty
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

How we price non-slip bath coating
We give every job a fixed quote from photos. These are the things that affect it:
- How easy the damage is to reach
- How much damage there is
- Whether we combine several jobs
- The material
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
We price nearly every job from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- The material, if you know it
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Nearby places to Low Springs
More services for Low Springs
Common problems we fix in Low Springs
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
What your quote should include
- What protection goes down before work starts
- Whether the price covers travel
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
What happens on the day
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Let us know about parking or access
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Covering Low Springs
Low Springs is about 1 mile north of Baildon, in Bradford. From the centre of Low Springs to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 140 towns and villages in Bradford, from the larger towns to small villages. You can also see our page for Leeds, about 10 miles away.
We cover every part of BD17 and LS20. From Mill Lane and Low Hill or a nearby road, a technician can come to you. We also cover the places around Low Springs: Hawksworth (1 mile north-east), Baildon (1 mile south), Charlestown (2 miles south), Esholt (2 miles east) and Menston (2 miles north-east). Within a short drive, we also cover Bradford (5 miles south), Keighley (6 miles west), Bingley (3 miles south-west), Shipley (3 miles south), Great Horton (6 miles south) and Upper Green (6 miles south).
Landmarks near Low Springs
Our customers here include homes close to Church of St John the Evangelist, Hawksworth Church of England Primary School and St. Mary's Menston, among other places. For rail, the closest station is Baildon station, roughly 1.4 miles south-east. A little further out are The Peace Museum (2.2 miles south) and High Royds Hospital Railway (2 miles north-east). For a walk, there’s Yeadon Tarn and Idle Hill.
Low Springs: your questions answered
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Will I see the coating?
Very little: the treated area looks slightly matt.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How much does non-slip bath coating cost in Low Springs?
Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
About our accreditations · Every repair comes with a one-year guarantee.

