Thurrock · England
Non-slip bath & shower coating in Low Street, Thurrock
Clear non-slip coatings for baths and shower trays in Low Street, carried out at your home and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people
About our non-slip bath coating in Low Street
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We are frequently asked to fix bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, in resurfaced baths, acrylic baths and wet room floors (ask us).
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Low Street (RM18)
- County
- Thurrock
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a morning or an afternoon, and we leave the room as we found it.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Let the surface dry out before the visit
- Let us know about parking or access
- Make sure the room can be ventilated
How to get a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will say immediately whether it can be repaired.
Advice
Landlords, agents and businesses in Low Street
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Questions from Low Street
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
What areas do you cover?
All of Thurrock, and the rest of the UK. Travel is included in the price.
What happens after I send photos?
We come back with a fixed quote. There’s no obligation to book.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
How we price non-slip bath coating
You will know the full cost before booking. We take into account:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- The material and finish
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.
Should you replace it?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Why Low Street customers choose us
- One price list for the entire UK
- Usually one visit, start to finish
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
See our full price list.
Also near Low Street
More services for Low Street
Our work in Low Street
Low Street is about 3 miles east of Grays, in Thurrock. We travel to homes and businesses in Low Street, so there is no workshop to go to. Low Street is one of 26 towns and villages in Thurrock we cover. You can also see our page for London, about 21 miles away.
Every address in RM18 is within our area. Jobs here include addresses on Station Road and Low Street Lane. We also travel to East Tilbury (1 mile north-east), Linford (1 mile north), Chalk (3 miles south), Church Street (4 miles south-east) and Lower Higham (4 miles south-east). Larger places within reach include Stanford-le-Hope (4 miles north-east), Grays (3 miles west), South Ockendon (6 miles north-west), Balstonia (3 miles north), Corringham (4 miles north-east) and Aveley (7 miles west).
Near you in Low Street
We visit homes around The Kings Head pub, East Tilbury Primary School and The Gateway Academy, among other places. Low Street’s nearest station is East Tilbury station, about 0.9 miles north-east. Other landmarks nearby include Orsett Rural District (2.9 miles north-west) and Walton Hall Museum (1.5 miles north). The countryside around Low Street includes Thurrock Thameside Nature Park and Sawyers Lake.
Signs you need non-slip bath coating in Low Street
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
If you can see any of these, send us a photo:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Before booking anyone
- Whether a trained technician does the job
- Whether the price covers travel
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
Can I fix it myself?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Low Street
- Shower trays
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
About our accreditations · Every repair comes with a one-year guarantee.
