Medway · England

Non-Slip Bath Coating in Lower Higham

Non-slip bath coating across Lower Higham and nearby, normally in one visit and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Lower Higham

Non-slip bath coating in Lower Higham without replacing anything

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, across resurfaced baths, shower trays and wet room floors (ask us).

Every job is backed for twelve months. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Location
Lower Higham (ME3)
Area hub
Medway
Warranty
One year on every repair
Price
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Our work in Lower Higham

Lower Higham is about 3 miles north-west of Rochester, in Medway. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We cover 68 places across Medway, from the larger towns to small villages. You can also see our page for London, about 25 miles away.

Here we cover the ME3 postcode area. Whether you live on Canal Road, Chalk Road and Chequers Street or a nearby road, a technician can come to you. Nearby, we also work in Church Street (1 mile north), Higham (1 mile south), Mockbeggar (1 mile east), Gadshill (1 mile south) and Cliffe Woods (2 miles east). Further out, we also cover Gillingham (6 miles south-east), Chatham (6 miles south-east), Rochester (3 miles south-east), Rainham (8 miles south-east), Strood (3 miles south) and Luton (5 miles south-east).

Around Lower Higham

Typical jobs here are in homes near Broomhill Park, Higham Primary School and The Chequers pub. Nearby too are St Mary's Church (0.8 miles north) and Strood Academy (2.2 miles south). Lower Higham has its own railway station: Higham station. A little further out are City of Rochester-upon-Medway (2.9 miles south-east) and Huguenot Museum (3.2 miles south-east). Green spaces nearby include Gad's Hill and Rede Common.

Map of Lower Higham © OpenStreetMap contributors

Do you need non-slip bath coating in Lower Higham?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

You may need us if you’ve spotted any of these:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Before you book anyone

  • A fixed quote, and whether VAT is included
  • What happens if the damage is worse than the photos show
  • Aftercare advice
  • Whether a trained technician does the job

10 questions to ask before you book

What non-slip bath coating costs

Each job gets its own fixed price. These are the things that affect it:

  • The colour and finish to match
  • How many items we do on one visit
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it

There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Lower Higham questions

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Do you work in Lower Higham?

Yes, we do. Repair technicians travel to Lower Higham from across the region, and the price is the same as everywhere else.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Is repairing better than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Do you cover the whole of Medway?

Everywhere in the UK, Lower Higham included. Travel is included in the price.

What information do you need?

Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

How the visit works

You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, and you can get on with other things while we are there.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Tell us about any previous repairs or coatings
  • Make sure the area is dry

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Send pictures for a quote

Read more

Honest limits

Not everything can be repaired, and we will tell you before we start. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • Honest advice, even when it means no job
  • Repair technicians who travel to you, UK-wide
  • Generally one visit, start to finish
  • No need to remove anything

Take a look at our pricing.

Work for landlords and builders

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.