Bath and North East Somerset · England
Non-slip bath & shower coating in Lyncombe, Bath and North East Somerset
Non-slip bath coating in and around Lyncombe: a fixed quote from photos, a tidy visit and a one-year guarantee.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Non-slip bath coating in Lyncombe, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. Our technicians work on resurfaced baths, acrylic baths and shower trays, and common reasons people get in touch are a bath or tray that is slippery when wet and worn-out textured areas.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Lyncombe (BA2, BA1)
- County
- Bath and North East Somerset
- Guarantee
- 12 months on all our work
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Lyncombe
Lyncombe is about 1 mile south-east of Bath, in Bath and North East Somerset. Whether you’re in the middle of Lyncombe or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Lyncombe is one of 136 places in Bath and North East Somerset we cover. We work right across the region, from Lyncombe to Birmingham (78 miles away).
Our visits in BA2 and BA1 work the same way as everywhere else we cover. Whether you live on Wells Road, Byron Road and Ferry Lane or anywhere nearby, we can come to you. If you are just outside Lyncombe, we cover Widcombe (1 mile north-east), Bear Flat (1 mile west), Bath (1 mile north-west), Combe Down (1 mile south-east) and Bathwick (1 mile north). Further out, we also cover Keynsham (7 miles west), Paulton (8 miles south-west), Peasedown St John (5 miles south-west), Saltford (5 miles north-west), Batheaston (3 miles north-east) and Timsbury (6 miles south-west).
Landmarks near Lyncombe
In Lyncombe, that means homes near Bath Royal Literary and Scientific Institution, City of Bath Technical School and Ring O Bells pub and the streets around them. Nearby too are Alexandra Park (less than half a mile west), Widcombe Infant School (less than half a mile north), Temperance Hall (within half a mile north) and Bath Abbey (0.6 miles north). Lyncombe has its own railway station: Bath Spa station. Nearby you will also find SouthGate (less than half a mile north) and Midford Castle (1.6 miles south).
- Schools near Lyncombe include Beechen Cliff School (under half a mile west)
What else we do in Lyncombe
Questions from Lyncombe
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What information do you need?
Photos of the damage, a photo of the entire bath or shower tray and your postcode. After that, we just agree a date.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Lyncombe.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you quote from pictures?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
What areas do you cover?
Everywhere in the UK, Lyncombe included. Travel is included in the price.
What we can’t put right
A repair is not right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Acrylic baths
- Shower trays
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, generally overnight.
Preparing for the visit
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Ask for a price
For a price in Lyncombe, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What non-slip bath coating costs
Each job gets its own fixed price. This is what makes a difference:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- The material and finish
- How many areas need work
We charge the same wherever you are, so there is no premium for Lyncombe. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Where you are, by postcode
- Natural light rather than flash
- The material, if you know it
- One picture of the whole bath or shower tray
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Do you need non-slip bath coating in Lyncombe?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Contact us if you’ve noticed:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
What to look for in a quote
- How to care for the finish
- The length of the guarantee and what it covers
- Who turns up on the day
- If travel is included in the price
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- A year’s guarantee on all work
- Free fixed quotes from pictures
- Same prices wherever you are
- No need to remove anything
See our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
