Kent · England

Non-Slip Bath Coating in Lynsted

Non-slip bath coating for Lynsted, without a refit. Send us photos for a fixed quote, then we come to you.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Lynsted

About our non-slip bath coating in Lynsted

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Common call-outs are for safety for older or less mobile people and resurfaced baths that are now too smooth, on enamelled baths, acrylic baths and resurfaced baths.

Every job is backed for twelve months. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Location
Lynsted (ME9)
County
Kent
Cover
12 months on all our work
Quote
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

Repairing versus replacing in Lynsted

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • CHAS and Constructionline accredited
  • We leave the room as we found it
  • A year’s guarantee on all work
  • Most jobs done in one visit

Read our full price list.

Can I fix it myself?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and how to care for it.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

Before we arrive

  • Let the surface dry out before the visit
  • Let us know if it has been repaired before
  • Open a window if you can

Get a quote

Upload photos of the damage and one of the whole item, with your ME9 postcode, and we’ll come back with a fixed quote.

Get a fixed price

Advice

Work for landlords and builders

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

What affects the price in Lynsted

Quotes are free and the price is fixed. What we take into account:

  • The size and number of damaged areas
  • Doing more than one item at once
  • The colour and finish to match
  • How easy the damage is to reach

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send photos for a quote

When you take your pictures, a few simple things make all the difference:

  • A wider photo showing the entire bath or shower tray
  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.

Signs you need non-slip bath coating in Lynsted

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

You may need us if you’ve spotted:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • Whether they match the colour on site
  • How long it needs to cure
  • How long the guarantee is and what it covers
  • How the room is protected while they work

Choosing a repair company

Our work in Lynsted

Lynsted is about 3 miles south-east of Sittingbourne, in Kent. We visit homes and businesses in Lynsted, so there’s no workshop to go to. We work in all 922 towns and villages in Kent, from the larger towns to small villages. Our jobs stretch from Lynsted to London (about 40 miles away).

We work across the ME9 postcode area. From The Street, St Pauls Court and Ludgate Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Bogle (1 mile north-east), Erriottwood (1 mile south), Bapchild (1 mile west), Newbury (1 mile south-west) and Radfield (1 mile north). Within a short drive, we also cover Maidstone (12 miles west), Ashford (12 miles south), Canterbury (13 miles east), Sittingbourne (3 miles north-west), Whitstable (11 miles east) and Faversham (4 miles east).

Landmarks near Lynsted

Typical jobs here are in homes near Black Lion Public House, Lynsted and Norton Primary School and Church of St Peter and St Paul. The nearest railway station is Teynham station, about 1.6 miles north-east of the centre. Nearby you will also find Newnham Castle (2 miles south) and Sittingbourne Heritage Museum (2.6 miles north-west).

Map of Lynsted © OpenStreetMap contributors

Lynsted questions

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Is a repair better than a new one?

Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What information do you need?

Photos of the damage, a picture of the whole bath or shower tray and your postcode. Then we will agree a date.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What does non-slip bath coating cost?

We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your ME9 postcode.

Can I get a quote without a visit?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

When a repair isn’t the answer

Some jobs are not right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.