Lincolnshire · England

Non-slip bath & shower coating in Maltby, Lincolnshire

Clear non-slip coatings for baths and shower trays in Maltby, carried out at your home and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Maltby?

Non-slip bath coating in Maltby without replacing anything

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Common call-outs are for safety for older or less mobile people and resurfaced baths that are now too smooth, in enamelled baths, wet room floors (ask us) and resurfaced baths.

The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Where
Maltby (LN11)
Area hub
Lincolnshire
Guarantee
A year, on every repair
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Common problems we fix in Maltby

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

These are the problems we’re asked about most:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people

Questions to ask before you book

  • Whether they match the colour on site
  • When it can be used again
  • What happens if they find more damage
  • How the room is protected while they work

Our hiring checklist

Where we work around Maltby

Maltby is about 2 miles south-west of Louth, in Lincolnshire. From the centre of Maltby to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 732 towns and villages across Lincolnshire. Our jobs stretch from Maltby to Leeds (about 70 miles away).

All of LN11 is within our area. We also cover the places around Maltby: Raithby (1 mile north), Hallington (1 mile north-west), Dovendale (1 mile south-west), Louth (2 miles north-east) and Little Cawthorpe (3 miles east). Larger places within reach include New Waltham (13 miles north), Horncastle (10 miles south), Mablethorpe (12 miles east), Humberston (14 miles north), Woodhall Spa (15 miles south-west) and Sutton on Sea (13 miles east).

What’s near Maltby

Locally, our jobs take us to homes close to King Edward VI Grammar School, Hubbard's Hills and Church of St Peter. A little further out are Louth Museum (2.3 miles north-east) and County Hospital Louth (2.4 miles north).

Map of Maltby © OpenStreetMap contributors

Repair or replace in Maltby?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why us?

  • Most jobs done in one visit
  • No need to remove anything
  • Technicians who travel to you, UK-wide
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our prices page.

When we’d advise against a repair

We’ll always be straight with you, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we work on in Maltby

  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays

Common questions in Maltby

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Are there extra charges for Maltby?

There’s no separate call-out charge. Your fixed quote includes everything.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will I see the coating?

Very little: it shows as a matt area where you stand.

Can you repair something that’s been repaired before?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What affects the price in Maltby

We price every job individually. The main factors are:

  • What kind of damage it is
  • How many items we do on one visit
  • Where the damage is and how we get to it
  • Unusual colours or finishes

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Send photos for a quote

When you take your pictures, a few simple things make all the difference:

  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • Any details about the material
  • One sharp close-up of the damage

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

How the visit works

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, usually overnight.

How to prepare

  • Let us know about parking or access
  • Point us to the nearest place to park
  • Mention any earlier repairs or resurfacing

Ask for a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Advice

Landlords, agents and businesses in Maltby

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.