Barnsley · England
Non-Slip Bath Coating for Manvers homes
Non-slip bath coating for Manvers, without a refit. Get a fixed quote from your pictures, then we come to you.
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Our work in Manvers
Manvers is about 1 mile east of Wath upon Dearne, in Barnsley. Customers in Manvers get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Our technicians cover all 94 towns and villages across Barnsley, from the larger towns to small villages. Our jobs stretch from Manvers to Leeds (23 miles away).
Our visits in S63, S97 and S64 are booked in the same way as anywhere else. Local streets include New Road, Oak Road and Park Road. Being close to the A633, Manvers is easy for our repair technicians to reach. We also travel to Wath upon Dearne (1 mile west), West Melton (1 mile west), Bolton upon Dearne (1 mile north-east), Brampton Bierlow (1 mile west) and Brampton (2 miles west). Within a short drive, we also cover Barnsley (7 miles north-west), Wombwell (3 miles north-west), Shaw Lands (7 miles north-west), Hoyland (4 miles west), Worsbrough (6 miles west) and Wilthorpe (8 miles north-west).
Near you in Manvers
Our customers here include homes close to Church of All Saints, Our Lady and St Joseph's Catholic Primary School and Wath Academy and the streets around them. You’ll also find Wath Academy (under half a mile south) and Saracens Head pub (less than half a mile west). The nearest railway station is Bolton-On-Dearne station, roughly 1.6 miles north-east of the centre. Nearby you’ll also find Conisbrough Castle (4.9 miles east) and Montagu Hospital (2.3 miles east). Green spaces nearby include Denaby Ings.
- Parks and local facilities nearby include Dearne Urban District (2.7 miles north-east)
Non-slip bath coating in Manvers, done in place
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and resurfaced baths that are now too smooth, we can normally put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Manvers (S63, S97, S64)
- Region
- Barnsley
- Cover
- A year, on every repair
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about non-slip bath coating in Manvers
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will I see the coating?
Very little: the treated area looks slightly matt.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
What happens once I’ve sent pictures?
We come back with a fixed quote, normally with dates to choose from. You’re under no obligation.
Do you come to Manvers?
Yes, we do. Technicians travel to Manvers from across the region, with no extra charge for travel.
Signs you need non-slip bath coating in Manvers
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Clients usually contact us about:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- Who turns up on the day
- How long the guarantee is and what it covers
- How to care for the finish
- What preparation is included
Nearby places to Manvers
More services for Manvers
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Resurfaced baths
- Enamelled baths
How it works
Arrival times are agreed in advance, so you’re not left guessing. Once we are there, the work takes a few hours for most jobs. We leave the room clean and you’ll know when it can be used.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
How to prepare
- Open a window if you can
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say right away whether it can be repaired.
Read more
What affects the price in Manvers
We give every job a fixed quote from pictures. This is what makes a difference:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How many areas need work
Our prices are the same across the UK, with no extra for Manvers. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- A wider photo showing the entire bath or shower tray
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Any details about the material
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Landlords, agents and businesses in Manvers
We carry out planned and one-off repairs for housing associations and facilities teams in Barnsley and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Should you replace it?
The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why Manvers clients choose us
- One price list for the entire UK
- Fixed prices from your photos
- We will tell you if it’s not worth repairing
- Repair technicians who travel to you, UK-wide
Take a look at our pricing.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
