Neath Port Talbot · Wales

Non-Slip Bath Coating in Margam Moors

Non-slip bath coating in Margam Moors without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Margam Moors

About our non-slip bath coating in Margam Moors

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Whether it’s resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, we can help, whatever the material.

Whatever the size of the job, it’s backed by a one-year guarantee in Margam Moors and across Neath Port Talbot. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
Margam Moors (SA13)
County
Neath Port Talbot
Cover
12 months on all our work
Price
Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

For landlords and businesses

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

For anyone letting property in or around Margam Moors, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

Where we work around Margam Moors

Margam Moors is about 2 miles south of Port Talbot, in Neath Port Talbot. Our technicians come to customers in Margam Moors and nearby villages, so there’s no workshop to go to. Margam Moors is one of 100 towns and villages in Neath Port Talbot where we work.

All of SA13 is within our area. From East Road and Central Road or anywhere nearby, we can come to you. We also travel to Brombil (1 mile east), Taibach (2 miles north), Margam (2 miles east), Tai-Bach (2 miles north-east) and Pen-y-cae (2 miles north). Further out, we also cover Neath (7 miles north), Mount Pleasant (6 miles north), Baglan Moors (3 miles north-west), Sandfields West (3 miles north-west), Pontardawe (12 miles north) and Baglan (4 miles north).

Around Margam Moors

Typical jobs here are in homes near Dyffryn School and Twelve Knights pub. For rail, the closest station is Port Talbot Parkway station, about 2 miles north of the centre. A little further out are Aberafan Centre (2.3 miles north) and Tata Steel Port Talbot Museum (less than half a mile north-east). Green spaces nearby include Graig Fawr and Kenfig Burrows slack.

Map of Margam Moors © OpenStreetMap contributors

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

What we work on

  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Acrylic baths

How the visit works

Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes a morning or an afternoon, and we’ll keep you posted as we go.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Mention if the room is upstairs or in a flat
  • Avoid using the area for a few hours before we arrive

How to get a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Read more

Signs you need non-slip bath coating in Margam Moors

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

If you can see any of these, send us a photo:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Questions to ask before you book

  • How soon you can use it again
  • How changes to the job are handled
  • Whether a trained technician does the job
  • Aftercare advice

Our hiring checklist

Prices and what affects them

We give every job a fixed price from photos. This is what makes a difference:

  • Any earlier repairs that need removing first
  • The size and number of damaged areas
  • The type of damage
  • Whether we combine several jobs

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

How to get a fixed price

A couple of clear pictures is all it takes. Try to include:

  • Good light, ideally daylight, without flash glare
  • Any details about the material
  • A clear, close picture of the problem area
  • Details of any past repairs

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

FAQs for Margam Moors

Do you cover the entire of Neath Port Talbot?

The entire UK, including all of Neath Port Talbot. Just include your postcode and we will offer you dates.

What happens next?

We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Repairing versus replacing in Margam Moors

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Margam Moors

  • We leave the room as we found it
  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • Nothing taken out or refitted

Take a look at our pricing.

DIY repairs versus a professional job

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.