Birmingham · England
Non-slip bath & shower coating in Marston, Birmingham
Non-slip bath coating for Marston, without a refit. Get a fixed price from your photos, then we come to you.
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
About Marston
Marston is about 5 miles south of Tamworth, in Birmingham. Jobs in Marston are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Marston is one of 140 places in Birmingham where we work. You can also see our page for Birmingham, about 10 miles away.
All of B76 is covered, from the main roads to the quietest streets. From Hollands Croft Lane, Old Kingsbury Road and Bodymoor Heath Lane or a nearby road, we can come to you. Close by, we cover Lea Marston (1 mile south), Kingsbury (1 mile north-east), Whitacre Heath (1 mile south-east), Cliff (2 miles north) and Hoggrill's End (2 miles south-east). Larger places within reach include Birmingham (10 miles south-west), Royal Sutton Coldfield (5 miles west), Erdington (6 miles west), Lee Bank (10 miles south-west), Cape Hill (12 miles west) and Streetly (8 miles west).
Landmarks near Marston
We visit homes around Kingsbury School, Kingsbury Water Park and Dog & Doublet Inn and the streets around them. Marston’s nearest station is Coleshill Parkway station, roughly 2.5 miles south of the centre. Well-known places in the area include Kingsbury Hall (1 mile north) and Robert Peel Society & Police Museum (2.3 miles north-west). Open spaces near Marston include Ladywalk Reserve.
How we handle non-slip bath coating in Marston
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We work on wet room floors (ask us), enamelled baths and shower trays, and the jobs we see most are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Marston (B76)
- Area hub
- Birmingham
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about non-slip bath coating in Marston
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How much does non-slip bath coating cost in Marston?
Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your B76 postcode.
What do you need from me?
Photos of the damage, a photo of the entire bath or shower tray and your postcode. Then we’ll agree a date.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send pictures.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Marston.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Nearby places to Marston
Other services in Marston
What affects the price in Marston
There are no hourly rates or hidden extras. The price is based on:
- The type of damage
- The size and number of damaged areas
- What the surface is made of
- How many items we do on one visit
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- Something in shot to show the size
- A wider photo showing the whole bath or shower tray
- Any details about the material
- Natural light rather than flash
Email us pictures of the damage and a wider shot of the entire item, with your B76 postcode, and we will reply with a fixed quote.
Honest limits
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
What we work on
- Resurfaced baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
What we are called out for in Marston
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Marston contact us include:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- How soon you can use it again
- What preparation is included
- Whether the colour is mixed to match
- Who turns up on the day
Why repair rather than replace?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Everything repaired in place
- One price list for the whole UK
- Every repair guaranteed for a year
- We’ll tell you if it’s not worth repairing
See our pricing.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Marston use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We tidy up before we leave and let you know when you can use it again.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Open a window if you can
- Point us to the nearest place to park
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
