Cheshire West and Chester · England
Non-slip bath & shower coating in Marton, Cheshire West and Chester
Non-slip bath coating for Marton, without a refit. Send us photos for a fixed quote, then book a visit.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
How we handle non-slip bath coating in Marton
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. We’re often asked to fix worn-out textured areas and bath mats that harbour mould or get forgotten, on resurfaced baths, enamelled baths and shower trays.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Marton (CW7, CW8)
- County
- Cheshire West and Chester
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
We do not charge extra for travel to Marton. The price depends on:
- Any earlier repairs that need removing first
- The material
- Unusual colours or finishes
- How many areas need work
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To make it quick:
- Something in shot to show the size
- The material, if you know it
- Details of any past repairs
- A photo taken from further back
For a price in Marton, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Towns and villages near Marton
Also in Marton
Repairing versus replacing in Marton
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why Marton customers choose us
- Nothing taken out or refitted
- One price list for the entire UK
- A year’s guarantee on all work
- We leave the room as we found it
Take a look at our pricing.
Marton: your questions answered
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon, and we will keep you posted as we go.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Ensure the area is dry
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price the same day in most cases.
Advice
Marton and the surrounding area
Marton is about 2 miles north-west of Winsford, in Cheshire West and Chester. Anywhere in CW7, a technician comes to you. Marton is one of 224 towns and villages in Cheshire West and Chester where we work. We work right across the region, from Marton to Liverpool (20 miles away).
Our repair technicians cover all of the CW7 and CW8 postcode area. From Cassia Lane, Dalefords Lane and Cassia Green Lane or anywhere nearby, we can come to you. Close by, we cover Foxwist Green (1 mile north), Nova Scotia (1 mile north-west), Whitegate (1 mile north-east), Daleford (1 mile north-west) and Meadowbank (2 miles east). Further out, we also cover Chester (13 miles west), Ellesmere Port (15 miles west), Northwich (4 miles north-east), Boughton (13 miles west), Frodsham (9 miles north-west) and Hoole (12 miles west).
Landmarks near Marton
Typical jobs here are in homes near St Mary's Church, Whitegate CofE Primary School and Abbotts Moss Nature Reserve. The closest station to Marton is Hartford station, roughly 2.4 miles north of the centre. Nearby you will also find Northwich Infirmary (4.2 miles north-east).
Landlord and trade work in Marton
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we are called out for in Marton
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
What your quote should include
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- How long the guarantee is and what it covers
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
About our accreditations · Every repair comes with a one-year guarantee.
