Monmouthshire · Wales

Non-Slip Bath Coating in Mathern

Non-slip bath coating across Mathern and nearby, done in a single visit in most cases and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Mathern

Non-slip bath coating in Mathern without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Common call-outs are for safety for older or less mobile people and resurfaced baths that are now too smooth, in acrylic baths, shower trays and enamelled baths.

Older homes around Mathern may have baths that have been in place for decades. If the bath is sound, non-slip bath coating gives it a new lease of life without disturbing the rest of the room.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
Mathern (NP16)
Region
Monmouthshire
Guarantee
12 months on all our work
Quotes
Fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Older homes around Mathern may have sizes and fittings that new pieces do not match. A repair keeps the original.

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why choose Surface Doctor in Mathern

  • Nothing taken out or refitted
  • Work done at your home or business
  • Fixed quotes from pictures
  • One-year guarantee on every repair

Take a look at our Pricing.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

We are used to working with agents and managing companies. Send the address, pictures and access details.

Your questions about non-slip bath coating in Mathern

My house in Mathern is a period property. Is the original worth keeping?

Frequently, yes: original pieces are typically worth keeping. Send us photos and we’ll tell you what’s possible.

Do you cover villages like Mathern?

Yes, we do: small places like Mathern are covered as standard. Tell us if access is tricky.

Can I get a quote without a visit?

Typically, yes. Clear photos let us give you a fixed quote without visiting.

Will there be a smell?

There can be some smell while we work. It clears as the materials cure.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is it worth repairing rather than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

When to call us in Mathern

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Send us a photo if you notice any of these:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

If you live in one of the older homes near a church such as St Tewdric's Church, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.

Comparing quotes

  • Whether a trained technician does the job
  • How your room will be protected
  • If travel is included in the price
  • How soon you can use it again

How to compare quotes

What we can’t put right

We will always be straight with you, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before you book.

Surfaces we repair

  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths

Prices and what affects them

We do not charge extra for travel to Mathern. The price comes down to:

  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • How many items we do on one visit
  • The size and number of damaged areas

The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.

Send photos for a quote

Most quotes are done from photos alone. To help us price it:

  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare

For a price in Mathern, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Bath repairs in Mathern: local notes

Landlords with property near Chepstow station (about 1.7 miles north-east) use us between tenancies, so baths and shower trays are repaired rather than replaced.

Mathern is about 2 miles south-west of Chepstow, in Monmouthshire. Whether you are in the middle of Mathern or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover 115 places in Monmouthshire. We work right across the region, from Mathern to Birmingham (about 68 miles away).

We cover every part of the NP16 postcode area for non-slip bath coating. Non-slip bath coating is available to homes on Chapel Lane, Mathern Road and Bailey's Hay and the roads around them. With the M48 close by, Mathern is easy for our technicians to reach. If you’re just outside Mathern, we cover Merthyr Tewdrig (1 mile north-west), Pwllmeyric (1 mile north), Bulwark (1 mile north-east), Chepstow (2 miles north-east) and Beachley (2 miles east). We also work in nearby towns such as Monmouth (13 miles north), Cil-y-coed (3 miles south-west), Overmonnow (13 miles north), Gwndy (6 miles south-west), Magor (7 miles south-west) and Usk (11 miles north-west).

Landmarks near Mathern

We visit homes around Chepstow School and Millers Arms, among other places. For rail, the closest station is Chepstow station, about 1.7 miles north-east of the centre. Further afield, we also cover the area around Moynes Court (within half a mile south-west) and St Lawrence Hospital (1.4 miles north). For a walk, there is Ifton Hill and Linen Well.

Map of Mathern © OpenStreetMap contributors

The process

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy. For a rural address like Mathern, we plan the journey in advance: let us know about lanes, gates and parking. Everything for the non-slip bath coating comes with us in one trip.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Let us know which floor the room is on
  • Plan for the room to be out of bounds to pets and children
  • Point us to the nearest place to park

Ask for a price

The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.