Derbyshire · England
Non-Slip Bath Coating for Mathersgrave homes
Non-slip bath coating in Mathersgrave without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Do you need non-slip bath coating in Mathersgrave?
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Look out for any of the following:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
Comparing quotes
- Aftercare advice
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- Who will actually do the work
Non-slip bath coating at your home in Mathersgrave
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you are dealing with worn-out textured areas and bath mats that harbour mould or get forgotten, we can usually put it right, on resurfaced baths, enamelled baths and shower trays alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Mathersgrave (DE55)
- Region
- Derbyshire
- Guarantee
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Arrival times are agreed in advance. Once we are there, the work takes a few hours for most jobs. The room is left tidy and ready to use once it has cured.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, usually overnight.
Preparing for the visit
- Let us know if it has been repaired before
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What we cannot put right
Some jobs aren’t right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
Also near Mathersgrave
Also in Mathersgrave
Your questions about non-slip bath coating in Mathersgrave
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How do I get a price for non-slip bath coating in Mathersgrave?
Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your DE55 postcode.
What areas do you cover?
We work UK-wide, so Mathersgrave is covered. Prices don’t change with location.
Repairing versus replacing in Mathersgrave
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Work done at your home or business
- Every repair guaranteed for a year
- Normally one visit, start to finish
- Dust sheets down, tidy finish
See our full price list.
Mathersgrave and the surrounding area
Mathersgrave is about 4 miles south-west of Clay Cross, in Derbyshire. Anywhere in DE55, we come to you. Mathersgrave is one of 532 towns and villages in Derbyshire we cover. Our nearest city page is Manchester, about 39 miles away.
Every address in DE55 is covered. You will find streets such as School Lane, Matlock Road and Whitecarr Lane, all of which we cover. We also cover the places around Mathersgrave: Doehole (1 mile west), Brackenfield (1 mile east), Wessington (1 mile south-east), Wheatcroft (1 mile south-west) and Butterley (1 mile north-west). We also work in nearby towns such as Chesterfield (8 miles north), Ilkeston (12 miles south-east), Belper (7 miles south), Heanor (9 miles south-east), Dronfield (12 miles north) and Ripley (6 miles south-east).
Near you in Mathersgrave
Locally, our jobs take us to homes close to Holy Trinity Church, Wessington Primary School and The Plough Inn And Attached Barn, among other places. The closest station to Mathersgrave is Whatstandwell station, roughly 3.4 miles south-west of the centre. Well-known places in the area include Willersley Castle (4 miles west) and Clay Cross Hospital (3.8 miles north-east).
Landlords, agents and businesses in Mathersgrave
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams in Derbyshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Prices and what affects them
Each job gets its own fixed quote. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Access to the area
- The material and finish
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from photos
You can usually get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- Any details about the material
- One picture of the whole bath or shower tray
- Something in shot to show the size
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
