Sheffield · England
Non-Slip Bath Coating for Meersbrook homes
Non-slip bath coating in Meersbrook without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Non-slip bath coating in Meersbrook, done in place
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We work on enamelled baths, acrylic baths and wet room floors (ask us), and people most frequently call us about safety for older or less mobile people and a bath or tray that is slippery when wet.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Where
- Meersbrook (S8, S2, S7)
- Area hub
- Sheffield
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Meersbrook
For anyone letting property in or around Meersbrook, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
About Meersbrook
Meersbrook is about 1 mile south of Sheffield, in Sheffield. From the centre of Meersbrook to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 118 towns and villages across Sheffield. You can also see our page for Manchester, about 32 miles away.
All of S8, S2 and S7 is within our area. Local streets include Cat Lane, Well Road and Kent Road, and we cover them all. Nearby, we also work in Norton Lees (1 mile south), Woodseats (1 mile south), Heeley (1 mile north-east), Lowfield (1 mile north) and Highfield (1 mile north). Larger places within reach include Upperthorpe (3 miles north), Walkley (3 miles north), Chapeltown (8 miles north), Neepsend (3 miles north), Malin Bridge (4 miles north-west) and Crookes (3 miles north-west).
Around Meersbrook
Our customers here include homes close to Meersbrook Park, Carfield Primary School and Newfield Secondary School. Nearby too are St Paul's Church and Centre (within half a mile south-west) and Red Lion pub (0.5 miles north-west). The nearest railway station is Sheffield station, about 1.8 miles north of the centre. A little further out are Arbourthorne (1.3 miles east) and Sheffield Castle (2.2 miles north). The countryside around Meersbrook includes Fox Hagg.
FAQs for Meersbrook
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Do you cover the entire of Sheffield?
The entire UK, including all of Sheffield. Send your postcode with your pictures and we will confirm dates.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What we cannot put right
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
What we work on
- Acrylic baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
How we price non-slip bath coating
You will know the full cost before booking. We look at:
- Access to the area
- How many items we do on one visit
- The material and finish
- How hard the colour is to match
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
Good photos mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- What it’s made of, if you know
- A clear, close picture of the problem area
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Towns and villages near Meersbrook
What else we do in Meersbrook
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, typically overnight.
Before we arrive
- Keep a parking space free if you can
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Signs you need non-slip bath coating in Meersbrook
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
People normally call us after spotting one of these:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Questions to ask before you book
- What the guarantee covers, and for how long
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Should you replace it?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Our prices are the same across the UK, so there is no premium for Meersbrook. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Typically one visit, start to finish
- Same prices wherever you are
- Work done at your home or business
- No need to remove anything
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
