Inverclyde · Scotland

Non-slip bath & shower coating in Midton, Inverclyde

Non-slip bath coating in and around Midton: photo quotes, tidy work and a year’s guarantee.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Midton

About our non-slip bath coating in Midton

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Whether it’s safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can help, whatever the material.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Location
Midton (PA19, PA16)
Region
Inverclyde
Warranty
One year on every repair
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Repair or replace in Midton?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Why book with us

  • One-year guarantee on every repair
  • No need to remove anything
  • Dust sheets down, tidy finish
  • One price list for the entire UK

Take a look at our prices page.

How the visit works

We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a few hours in most cases. The room is left tidy.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Tell us if there are stairs or a lift
  • Clear the area around the damage

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Get a fixed quote

Read more

Signs you need non-slip bath coating in Midton

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted any of these:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • What prep work is covered
  • What protection goes down before work starts
  • If travel is included in the price
  • Aftercare advice

10 questions to ask before you book

Questions from Midton

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the pictures can’t show what we need.

Do you cover the whole of Inverclyde?

We work UK-wide. Our prices are the same everywhere.

Can pets and children be at home?

Keep pets and children away from the work area on the day.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you cover Midton?

We do. Technicians travel to Midton from across the region, with no extra charge for travel.

For landlords and businesses

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Prices and what affects them

We price every job individually. What matters most is:

  • The size and number of damaged areas
  • The material and finish
  • Access to the area
  • Whether it’s a chip, crack, burn or wear

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.

How to get a fixed price

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • What it’s made of, if you know
  • Where you are, by postcode
  • One picture of the entire bath or shower tray
  • Details of any past repairs

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What we can’t put right

Not everything can be repaired, and we would rather say so up front. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths
  • Shower trays

Where we work around Midton

Midton is about 2 miles west of Greenock, in Inverclyde. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 19 towns and villages in Inverclyde. Our jobs stretch from Midton to Glasgow (about 22 miles away).

Jobs in PA19 and PA16 work the same way as everywhere else we cover. Jobs here include addresses on Fife Road, Golf Road and Banff Road. Main roads around Midton include the A770, so getting to you is simple. Neighbouring places we cover include Ashton (1 mile south-west), Gourock (1 mile east), Trumpethill (1 mile west), Braeside (1 mile south) and Branchton (1 mile south-east). We also work in nearby towns such as Port Glasgow (6 miles east), Cartsdyke (3 miles east), Kilmacolm (9 miles south-east), Mid Auchinleck (7 miles east), Inverkip (3 miles south-west) and Bogston (5 miles east).

Local landmarks in Midton

We visit homes around Gourock High School and St Bartholomew's Church. The nearest railway station is Gourock station, roughly 0.8 miles north-east. Nearby you’ll also find Oak Mall (2.6 miles east) and McLean Museum and Art Gallery (2.4 miles east). Green spaces nearby include Lyle Hill and Loch Loskin.

Map of Midton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.