Derbyshire · England
Non-slip bath & shower coating in Midway, Derbyshire
Non-slip bath coating in Midway without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
What we’re called out for in Midway
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Signs it’s time to call us include:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
What to look for in a quote
- The length of the guarantee and what it covers
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
Non-slip bath coating at your home in Midway
It suits older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Whether it’s bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can typically put it right, whatever the material.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Midway (DE11)
- County
- Derbyshire
- Warranty
- One year on every repair
- Price
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Midway
Other services in Midway
About Midway
Midway is about 1 mile north-east of Swadlincote, in Derbyshire. Whether you are in the middle of Midway or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 532 towns and villages across Derbyshire, from the larger towns to small villages. You can also see our page for Birmingham, about 26 miles away.
We cover every part of DE11. Whether you live on Kings Road, Byron Road and Burton Road or anywhere nearby, a technician can come to you. With the A511 close by, Midway is simple for us to get to. We also travel to Lower Midway (1 mile north), Upper Midway (1 mile north-west), Swadlincote (1 mile south-west), Hartshorne (1 mile east) and Woodville (1 mile south-east). Within a short drive, we also cover Long Eaton (13 miles north-east), Sandiacre (14 miles north-east), Hilton (7 miles north-west), Measham (6 miles south), Melbourne (6 miles north-east) and Chellaston (7 miles north-east).
What’s near Midway
Our clients here include homes close to Eureka Primary School, The Sir Nigel Gresley pub and Granville Community School and the streets around them. Other local landmarks include Emmanuel Church (0.6 miles south) and The Pingle School (0.8 miles west). For rail, the closest station is Burton-On-Trent station, about 4.3 miles north-west of the centre. A little further out are Bretby Castle (1.8 miles north-west) and Sharpe's Pottery Museum (0.8 miles south-west).
Midway: your questions answered
What happens if you find more damage?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
What does non-slip bath coating cost?
We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What non-slip bath coating costs
Quotes are free and the price is fixed. What we look at:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The size and number of damaged areas
- Whether we combine several jobs
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- A photo taken from further back
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Upload pictures of the damage and one of the entire item, and tell us you are in Midway, and we’ll reply with a fixed quote.
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we can’t put right
We will always be straight with you, so here’s what a repair cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
Materials we repair
- Enamelled baths
- Wet room floors (ask us)
- Acrylic baths
- Shower trays
- Resurfaced baths
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Midway clients choose us
- CHAS, Constructionline and SafeContractor accredited
- We leave the room as we found it
- No need to remove anything
- Fixed prices from your pictures
Take a look at our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
