Dorset · England
Non-Slip Bath Coating for Milborne Port homes
Non-slip bath coating for Milborne Port, without a refit. Send us pictures for a fixed quote, then book a visit.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Milborne Port and nearby
Milborne Port is about 8 miles east of Yeovil, in Dorset. From the centre of Milborne Port to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 462 places in Dorset, from the larger towns to small villages.
We work across the DT9 postcode area and the streets around it. That includes homes on High Street, Station Road and London Road. Nearby, we also work in Goathill (1 mile south), Milborne Wick (1 mile north-west), Oborne (1 mile west), Henstridge Bowden (1 mile north-east) and Purse Caundle (1 mile south-east). Within a short drive, we also cover Blandford Forum (15 miles south-east), Gillingham (9 miles north-east), Shaftesbury (12 miles east), Sherborne (3 miles south-west), Peacemarsh (10 miles north-east) and Sturminster Newton (8 miles east).
What’s near Milborne Port
Locally, our jobs take us to homes close to Tippling Philosopher pub, Church of St John the Evangelist and The Gryphon School. For rail, the closest station is Sherborne station, roughly 2.7 miles south-west. Well-known places in the area include Sherborne Old Castle (2.1 miles south-west) and Sherborne Steam & Waterwheel Centre (2.2 miles south-west).
How we handle non-slip bath coating in Milborne Port
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. If you’re dealing with worn-out textured areas and bath mats that harbour mould or get forgotten, we can usually put it right, on shower trays, acrylic baths and enamelled baths alike.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Milborne Port (DT9)
- Area hub
- Dorset
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
See our prices page.
Also near Milborne Port
Also in Milborne Port
What non-slip bath coating costs
We don’t charge extra for travel to Milborne Port. The price depends on:
- The material
- How easy the damage is to reach
- How many items we do on one visit
- How many areas need work
We charge the same wherever you are, so there’s no premium for Milborne Port. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- A photo taken from further back
- The material, if you know it
If you are in Milborne Port and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Landlords, agents and businesses in Milborne Port
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Do you need non-slip bath coating in Milborne Port?
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for these signs:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
What to look for in a quote
- What happens if they find more damage
- Whether they match the colour on site
- What protection goes down before work starts
- How soon you can use it again
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, typically overnight.
Before we arrive
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
How to get a price
The quickest way to a price is to send two or three photos through our quote form or call us. We will say right away whether it can be repaired.
Advice
When we would advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
- Enamelled baths
Your questions about non-slip bath coating in Milborne Port
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Milborne Port.
About our accreditations · Every repair comes with a one-year guarantee.
