Kent · England
Non-Slip Bath Coating in Milebush
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Milebush. Send pictures for a free, fixed quote.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.
What you get with us
- Free fixed quotes from pictures
- Usually one visit, start to finish
- Straight answers about what a repair can do
- Everything repaired in place
Take a look at our pricing.
Non-slip bath coating in Milebush without replacing anything
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on resurfaced baths, wet room floors (ask us) and shower trays, and common reasons people get in touch are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.
All of our repairs are guaranteed for twelve months in Milebush and everywhere else. If something goes wrong with the work, we come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Milebush (TN12)
- Area hub
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Milebush questions
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
What areas do you cover?
We cover the entire UK, including Milebush and the rest of Kent. Send your postcode with your photos and we’ll offer you dates.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What happens after I send pictures?
We come back with a fixed price. You’re under no obligation.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Also near Milebush
What else we do in Milebush
Where we work around Milebush
Milebush is about 6 miles south of Maidstone, in Kent. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 922 places in Kent. Our nearest city page is London, about 34 miles away.
We cover every part of TN12. Jobs here include addresses on Maidstone Road and Milebush Lane and the roads around them. We also cover the places around Milebush: St Ann's Green (1 mile east), Underling Green (1 mile north-east), Wanshurst Green (1 mile south-east), Cross-at-Hand (2 miles east) and Marden Thorn (2 miles south). Within a short drive, we also cover Maidstone (6 miles north), Sittingbourne (15 miles north-east), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (11 miles west), Tonbridge (10 miles west) and Kings Hill (7 miles north-west).
Around Milebush
Typical jobs here are in homes near St Michael and All Angels Church and the streets around them. For rail, the closest station is Marden station, roughly 1.1 miles south-west of the centre. Nearby you’ll also find Sutton Valence Castle (4.2 miles north-east) and Oakwood Hospital (5.7 miles north).
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a morning or an afternoon. We clean up when we’re done and tell you when it’s ready to use.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Clear the area around the damage
- Make sure the room can be ventilated
- Let us know if it has been repaired before
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
What we can’t put right
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
Work for landlords and builders
Landlords, letting agents and housing providers in Milebush use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
How we price non-slip bath coating
You won’t pay by the hour. The price is based on:
- How many items we do on one visit
- How much damage there is
- Access to the area
- The colour and finish to match
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Two or three clear photos are generally enough. Try to include:
- A clear, close picture of the problem area
- One picture of the whole bath or shower tray
- Whether it’s been repaired or coated before
- Any details about the material
For a price in Milebush, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What we are called out for in Milebush
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
These are the problems we’re asked about most:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Comparing quotes
- Whether the price is fixed and includes VAT
- What happens if they find more damage
- How long the guarantee is and what it covers
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
