Hampshire · England
Non-Slip Bath Coating in Milford on Sea
Non-slip bath coating across Milford on Sea and nearby, done in a single visit in most cases.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Covering Milford on Sea
Milford on Sea is about 3 miles south-west of Lymington, in Hampshire. From the centre of Milford on Sea to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Milford on Sea is one of 683 towns and villages in Hampshire where we work.
Our repair technicians cover all of the SO41 postcode area and the streets around it. You’ll find streets such as High Street, Love Lane and Greenbanks Close, and we cover them all. If you’re just outside Milford on Sea, we cover Lymore (1 mile north-east), Keyhaven (1 mile east), Everton (1 mile north), Lower Pennington (2 miles north-east) and Pennington (2 miles north-east). Further out, we also cover Totton (14 miles north), Hythe (13 miles north-east), New Milton (4 miles north-west), Ringwood (12 miles north-west), Barton on Sea (3 miles west) and Dibden Purlieu (12 miles north-east).
What’s near Milford on Sea
In Milford on Sea, that means homes near Priestlands School, The Red Lion Public House and Church of All Saints. For rail, the closest station is Lymington Town station, about 3.4 miles north-east. Nearby you will also find Yarmouth Castle (4.3 miles east) and Lymington New Forest Hospital (3.6 miles north-east). Not far away are Milford on Sea LNR and Tennyson Down.
Non-slip bath coating in Milford on Sea without replacing anything
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, on enamelled baths, resurfaced baths and acrylic baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Milford on Sea (SO41)
- Area hub
- Hampshire
- Warranty
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Milford on Sea
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Send us a photo if you notice any of these:
- Safety for older or less mobile people
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Comparing quotes
- Who turns up on the day
- Whether the price covers travel
- What happens if the damage is worse than the photos show
- How the room is protected while they work
Places near Milford on Sea
Other services in Milford on Sea
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
FAQs for Milford on Sea
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Milford on Sea.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send photos?
We review the photos and send a fixed quote.
When a repair is not the answer
A repair is not right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
What non-slip bath coating costs
We price every job individually, from your pictures. The main factors are:
- Doing more than one item at once
- The material
- Whether it’s a chip, crack, burn or wear
- How many areas need work
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
Two or three clear pictures are typically enough. It helps if you send:
- The material, if you know it
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The process
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, including clearing up.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, usually overnight.
How to prepare
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Same prices wherever you are
- One visit for most repairs
- Straight answers about what a repair can do
- Repair technicians who travel to you, UK-wide
See our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
