Wiltshire · England
Non-slip bath & shower coating in Milford, Wiltshire
Our technicians come to Milford for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Prices and what affects them
You will not pay by the hour. The price depends on:
- The type of damage
- The colour and finish to match
- The size and number of damaged areas
- The material and finish
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- Any details about the material
- A clear, close picture of the problem area
- A wider photo showing the entire bath or shower tray
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
Non-slip bath coating at your home in Milford
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We are often asked to fix resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, across shower trays, acrylic baths and resurfaced baths.
All our work is covered by a one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Milford (SP1, SP2, SP5)
- County
- Wiltshire
- Cover
- One year on every repair
- Quote
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair won’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before you book.
What we work on
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
Your questions about non-slip bath coating in Milford
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is there any odour?
Expect a mild smell while we are working.
Do you work in Milford?
Yes. We cover the entire UK and come to Milford. Send us pictures for a fixed quote, or call 0345 017 0787.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon, tidy-up included.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, usually overnight.
How to prepare
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Landlords, agents and businesses in Milford
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Where we work around Milford
Milford is about 1 mile south-east of Salisbury, in Wiltshire. Jobs in Milford are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover all 425 towns and villages in Wiltshire. You can also see our page for London, about 79 miles away.
Our technicians cover all of the SP1, SP2 and SP5 postcode area. We regularly work on streets such as Cow Lane, Salt Lane and The Avenue. Neighbouring places we cover include Bugmore (1 mile south-west), Laverstock (1 mile north-east), Salisbury (1 mile north-west), Harnham (1 mile south-west) and Britford (1 mile south). Further out, we also cover Amesbury (7 miles north), Old Sarum (3 miles north), Bulford (9 miles north), Wilton (4 miles west), Tisbury (13 miles west) and Durrington (9 miles north).
Landmarks near Milford
We visit homes around Bishop Wordsworth's Church of England Grammar School, Salisbury Sixth Form College and Corn Exchange, among other places. Nearby too are Church of St Martin (less than half a mile south-west), St Martin's CofE Voluntary Aided Primary School (less than half a mile north-west) and The Railway Inn/The Dust Hole (less than half a mile south-west). For rail, the closest station is Salisbury station, about 1 mile west. Well-known places in the area include Harvard Hospital (1.2 miles south-west) and Clarendon Palace (1.8 miles east). Green spaces nearby include Harnham Hill.
- Other local spots include Salisbury (0.6 miles west)
More services for Milford
Should you replace it?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Milford
- Repair technicians who travel to you, UK-wide
- A year’s guarantee on all work
- Normally one visit, start to finish
- Nothing taken out or refitted
Take a look at our full price list.
What we’re called out for in Milford
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Look out for any of the following:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
What to look for in a quote
- How to care for the finish
- What prep work is covered
- A fixed quote, and whether VAT is included
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
