Tameside · England
Non-slip bath & shower coating in Millbrook, Tameside
Non-slip bath coating for Millbrook, without a refit. Send us photos for a fixed quote, then we come to you.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Non-slip bath coating at your home in Millbrook
It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. Our technicians work on enamelled baths, acrylic baths and resurfaced baths, and people most often call us about safety for older or less mobile people and a bath or tray that is slippery when wet.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Millbrook (SK15)
- Region
- Tameside
- Guarantee
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- We leave the room as we found it
- Normally one visit, start to finish
See our full price list.
Places near Millbrook
Also in Millbrook
Millbrook questions
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
How do I book?
Send photos through the quote form or call 0345 017 0787.
How do I get a price for non-slip bath coating in Millbrook?
We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SK15 postcode.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Common problems we fix in Millbrook
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for any of the following:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
What to look for in a quote
- When it can be used again
- Who turns up on the day
- A fixed quote, and whether VAT is included
- Whether the price covers travel
What a repair cannot fix
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
- Resurfaced baths
Millbrook and nearby
Millbrook is about 1 mile north-east of Stalybridge, in Tameside. Jobs in Millbrook are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our repair technicians cover 32 places in Tameside, from the larger towns to small villages. You can also see our page for Manchester, about 8 miles away.
Jobs in SK15 work the same way as everywhere else we cover. You will find streets such as Elms Road, Grove Road and Besom Lane, and we cover them all. If you’re just outside Millbrook, we cover Heyrod (1 mile north-west), Stalybridge (1 mile south-west), Matley (2 miles south), Dukinfield (2 miles south-west) and Ashton-under-Lyne (2 miles west). Further out, we also cover Denton (4 miles south-west), Hyde (3 miles south-west), Droylsden (5 miles west), Audenshaw (4 miles west), Haughton Green (4 miles south-west) and Hattersley (3 miles south).
Around Millbrook
Around Millbrook, we work in homes near Copley Academy, St Raphael's Catholic Primary School and Church of St James and the streets around them. Millbrook’s nearest station is Stalybridge station, about 1.4 miles south-west of the centre. Nearby you will also find Ashton Arcades (2.6 miles west) and Tameside General Hospital (1.5 miles west). Open spaces near Millbrook include Eastwood Nature Reserve and Harridge Pike.
- Other local spots include Stalybridge North (0.5 miles north-west)
How we price non-slip bath coating
Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- Unusual colours or finishes
- The material and finish
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Details of any past repairs
- One picture of the entire bath or shower tray
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we’re there.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
