Kent · England
Non-slip bath & shower coating in Milstead, Kent
We travel to Milstead for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Worn-out textured areas
Do you need non-slip bath coating in Milstead?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Clients normally contact us about:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
What to look for in a quote
- Aftercare advice
- How the colour is matched
- What happens if they find more damage
- What protection goes down before work starts
Non-slip bath coating at your home in Milstead
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Our repair technicians work on acrylic baths, shower trays and enamelled baths, and common reasons people get in touch are a bath or tray that is slippery when wet and worn-out textured areas.
Whatever the size of the job, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Milstead (ME9)
- County
- Kent
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Milstead questions
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will there be a smell?
There may be a mild smell during the work.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Are there extra charges for Milstead?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Repairing versus replacing in Milstead
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Our prices are the same across the UK, so there is no premium for Milstead. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- Straight answers about what a repair can do
See our prices page.
What we can’t put right
A repair isn’t right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
- Enamelled baths
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About Milstead
Milstead is about 3 miles south of Sittingbourne, in Kent. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 922 places across Kent. We work right across the region, from Milstead to London (about 38 miles away).
Our repair technicians cover all of the ME9 postcode area and the streets around it. Whether you live on Frinsted Road, Manor Road and Horn Hill or anywhere nearby, we can come to you. We also travel to Hollybushes (1 mile south-east), Bluetown (1 mile south-east), Frinsted (1 mile south-west), Wichling (2 miles south-east) and Doddington (2 miles south-east). Larger places within reach include Maidstone (9 miles west), Ashford (12 miles south-east), Canterbury (15 miles east), Sittingbourne (3 miles north), Whitstable (14 miles east) and Faversham (7 miles east).
Local landmarks in Milstead
Typical jobs here are in homes near Church of St Mary and the Holy Cross, Milstead and Frinsted Church of England Primary School and Cromers Wood. For rail, the closest station is Sittingbourne station, roughly 3.2 miles north of the centre. A little further out are Sittingbourne Heritage Museum (3 miles north) and Newnham Castle (3.2 miles east).
How we price non-slip bath coating
You will not pay by the hour. The price is based on:
- The material and finish
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- What it’s made of, if you know
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Nearby places to Milstead
What else we do in Milstead
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, usually overnight.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
