Nottinghamshire · England

Non-slip bath & shower coating in Milton, Nottinghamshire

Local non-slip bath coating for Milton: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Milton?

About Milton

Milton is about 5 miles south of Retford, in Nottinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Milton is one of 329 towns and villages in Nottinghamshire where we work. Our jobs stretch from Milton to Leeds (46 miles away).

We work across the NG22 postcode area. We regularly work on streets such as Main Street and The Avenue and the roads around them. Other places close to Milton include Markham Moor (1 mile east), West Markham (1 mile south-east), West Drayton (1 mile north), Gamston (2 miles north) and Haughton (2 miles west). Larger places within reach include Mansfield (13 miles south-west), Worksop (9 miles north-west), Newark-on-Trent (13 miles south-east), Retford (5 miles north), Mansfield Woodhouse (12 miles south-west) and Forest Town (12 miles south-west).

Around Milton

Locally, our jobs take us to homes close to Milton Mausoleum and Tuxford Academy. The closest station to Milton is Retford station, about 4.4 miles north of the centre. Well-known places in the area include The Museum of the Horse (2 miles south-east) and Rampton Secure Hospital (4.8 miles north-east).

Map of Milton © OpenStreetMap contributors

Non-slip bath coating in Milton, done in place

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. We regularly repair wet room floors (ask us), enamelled baths and acrylic baths, and the jobs we see most are a bath or tray that is slippery when wet and worn-out textured areas.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Where
Milton (NG22)
Region
Nottinghamshire
Guarantee
12 months on all our work
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

Do you need non-slip bath coating in Milton?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a picture:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Worn-out textured areas

Comparing quotes

  • How your room will be protected
  • Aftercare advice
  • If travel is included in the price
  • What preparation is included

10 questions to ask before booking

How we price non-slip bath coating

There is no area surcharge for Milton. What changes the price is:

  • Where the damage is and how we get to it
  • How hard the colour is to match
  • Whether we combine several jobs
  • The material

Our prices are the same across the UK, with no extra for Milton. The job itself decides the price: how much damage, what it’s made of and how many items.

How to get a fixed price

Most quotes are done from photos alone. To make it quick:

  • Any earlier repairs or coatings
  • Any details about the material
  • A photo taken from further back
  • A clear, close picture of the problem area

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

How the visit works

There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a morning or an afternoon.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit
  • Let us know if it has been repaired before

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed quote

Read more

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • Honest advice, even when it means no job
  • Accredited with CHAS, Constructionline and SafeContractor
  • Same prices wherever you are
  • Everything repaired in place

Take a look at our full price list.

Your questions about non-slip bath coating in Milton

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

What happens once I’ve sent photos?

You will get a fixed quote back, usually with dates to choose from. There’s no obligation to book.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send photos.

Can you price it without visiting?

Normally, yes. A close-up and a wider photo are enough to give a fixed quote.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What a repair can’t fix

Not everything can be repaired, and we’d rather say so up front. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we repair

  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths

Landlord and trade work in Milton

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.