Norfolk · England

Non-Slip Bath Coating in Morningthorpe

Non-slip bath coating across Morningthorpe and nearby, done in a single visit in most cases.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Morningthorpe

Non-slip bath coating at your home in Morningthorpe

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and safety for older or less mobile people, we can typically put it right, on shower trays, resurfaced baths and enamelled baths alike.

A one-year guarantee comes with the work, just as it does everywhere we cover. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Morningthorpe (NR15)
Area hub
Norfolk
Guarantee
A year, on every repair
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Do you need non-slip bath coating in Morningthorpe?

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a picture:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • What happens if the damage is worse than the photos show
  • How long the guarantee is and what it covers
  • How your room will be protected

How to compare quotes

Common questions in Morningthorpe

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Do you work for landlords and businesses?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

What areas do you cover?

The whole UK, including all of Norfolk. Send your postcode with your pictures and we will offer you dates.

What happens after I send pictures?

We come back with a fixed price, plus dates. You are under no obligation.

Landlord and trade work in Morningthorpe

Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We work for landlords, letting agents and housing providers in Morningthorpe as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

What non-slip bath coating costs

You will not pay by the hour. The price is based on:

  • Where the damage is and how we get to it
  • What kind of damage it is
  • Any earlier repairs that need removing first
  • How much damage there is

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Getting a price from photos

Almost every job we do is priced from pictures. This is what to send:

  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • A coin beside the damage so we can judge size

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

How the visit works

Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for a few hours. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Let the surface dry out before the visit
  • Ensure the room can be ventilated
  • Tell us about any previous repairs or coatings

Get a quote

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. You’ll get a fixed price, not an estimate.

Get a free quote

Advice

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

What we cannot put right

Before you book, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly before you book.

What we work on

  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Shower trays

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. We charge the same wherever you are, with no extra for Morningthorpe. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why us?

  • Every repair guaranteed for a year
  • Dust sheets down, tidy finish
  • CHAS and Constructionline accredited
  • Everything repaired in place

See our pricing.

Our work in Morningthorpe

Morningthorpe is about 8 miles south of Cringleford, in Norfolk. We travel to homes and businesses in Morningthorpe and the surrounding area, so there is no workshop to go to. Morningthorpe is one of 797 places in Norfolk where we work.

Jobs in NR15 work the same way as everywhere else we cover. From Edge's Lane and School Road or a nearby road, we can come to you. If you are just outside Morningthorpe, we cover Fritton (1 mile east), Shelton (1 mile south), Stratton St Michael (1 mile north-west), Long Stratton (1 mile west) and Hardwick (2 miles south). Within a short drive, we also cover Norwich (11 miles north), Wymondham (9 miles north-west), Sprowston (12 miles north), Thorpe St Andrew (11 miles north), Attleborough (11 miles west) and Norwich Lanes (10 miles north).

Near you in Morningthorpe

Around Morningthorpe, we work in homes near Shelton with Hardwick Community School, Long Stratton High School and Church of St John the Baptist. Other landmarks nearby include Denton Castle (3.5 miles south-east) and Norfolk Tank Museum (2.9 miles west).

Map of Morningthorpe © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.