Cambridgeshire · England

Non-Slip Bath Coating in Murrow

Our technicians come to Murrow for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Murrow

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why book with us

  • No need to remove anything
  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • Work done at your home or business

See our prices page.

Non-slip bath coating in Murrow, done in place

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We regularly repair resurfaced baths, enamelled baths and shower trays, and the jobs we see most are safety for older or less mobile people and resurfaced baths that are now too smooth.

All of our repairs are guaranteed for twelve months in Murrow and everywhere else. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Murrow (PE13)
Area hub
Cambridgeshire
Warranty
12 months on all our work
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.

What we can’t put right

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

What we work on

  • Resurfaced baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Acrylic baths

Murrow and nearby

Murrow is about 6 miles west of Wisbech, in Cambridgeshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Murrow is one of 371 places in Cambridgeshire where we work. Our jobs stretch from Murrow to London (about 79 miles away).

Postcode districts we cover here: PE13. Whether you live on Back Road, Front Road and Silver's Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Parson Drove (1 mile north), Rogues Alley (1 mile south-west), Tholomas Drove (1 mile east), Bunker's Hill (2 miles east) and Throckenholt (2 miles north-west). Within a short drive, we also cover Wisbech (6 miles east), March (7 miles south), Whittlesey (9 miles south-west), Chatteris (13 miles south), Yaxley (15 miles south-west) and Ramsey (15 miles south-west).

Local landmarks in Murrow

Around Murrow, we work in homes near Murrow Primary Academy and Church of Corpus Christi and the streets around them. Other landmarks nearby include North Cambridgeshire Hospital (5.6 miles east).

Map of Murrow © OpenStreetMap contributors

Signs you need non-slip bath coating in Murrow

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Typical reasons for a call-out include:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • How changes to the job are handled
  • How the room is protected while they work
  • Is the price fixed, and does it include VAT?
  • Whether there are any call-out or travel charges

Our hiring checklist

How we price non-slip bath coating

You will know the full cost before you book. We look at:

  • The colour and finish to match
  • Any earlier repairs that need removing first
  • The type of damage
  • How easy the damage is to reach

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Send pictures for a quote

You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:

  • The material, if you know it
  • Where you are, by postcode
  • A coin or ruler next to the damage for scale
  • Details of any past repairs

Most customers in Murrow get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

The process

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a morning or an afternoon. We leave the room clean.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Let us know about parking or access
  • Move bottles, mats and clutter away from the area

Getting a price

The quickest way to a price is to send two or three pictures using our quote form or call us. We will tell you honestly whether it can be repaired.

Get a free quote

Read more

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Cambridgeshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Murrow questions

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How do I book?

Send photos through the quote form or call 0345 017 0787, and we will take it from there.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

Can you quote from photos?

Nearly always. If photos don’t show enough, we will ask for another angle.

Can you repair something that is been repaired before?

Most of the time. Let us know what was used before.

What happens next?

We review the photos and send a fixed quote with dates.

What if the damage is worse than the pictures show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.