Gwynedd · Wales

Non-slip bath & shower coating in Nasareth, Gwynedd

Non-slip bath coating in and around Nasareth: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Nasareth?

How we handle non-slip bath coating in Nasareth

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Whether it’s a bath or tray that is slippery when wet and safety for older or less mobile people, we can help.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Area
Nasareth (LL54)
Area hub
Gwynedd
Warranty
A year, on every repair
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.

What you get with us

  • Straight answers about what a repair can do
  • Everything repaired in place
  • One-year guarantee on every repair
  • We leave the room as we found it

Take a look at our full price list.

Honest limits

We will always be straight with you, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)

Our work in Nasareth

Nasareth is about 15 miles south-west of Bangor, in Gwynedd. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 165 towns and villages in Gwynedd. You can also see our page for Liverpool, about 62 miles away.

Jobs in LL54 work the same way as everywhere else we cover. Nearby, we also work in Nebo (1 mile east), Llanllyfni (1 mile north), Penygroes (2 miles north), Talysarn (2 miles north-east) and Groeslon (3 miles north). Further out, we also cover Bangor (15 miles north-east), Caernarfon (8 miles north), Bethesda (14 miles north-east), Upper Bangor (15 miles north-east), Glanadda (14 miles north-east) and Gerlan (14 miles north-east).

Near you in Nasareth

Around Nasareth, we work in homes near St Rhedyw's Church and the streets around them. Other landmarks nearby include Hen Gastell (4.4 miles north) and Parc Glynllifon (3.3 miles north). Green spaces nearby include Llyn Cwm Dulyn and Foel.

Map of Nasareth © OpenStreetMap contributors

For landlords and businesses

We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What we are called out for in Nasareth

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Send us a photo if you notice any of these:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

Before you book anyone

  • The length of the guarantee and what it covers
  • Whether they match the colour on site
  • How long it needs to cure
  • What preparation is included

10 questions to ask before you book

What we do, step by step

Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Point us to the nearest place to park
  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing

Get a quote

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.

Get a free quote

Read more

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.

FAQs for Nasareth

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

What if the damage is worse than the photos show?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before and we will plan for it.

Do you charge for travel?

We don’t add a call-out fee. The fixed price covers the visit and the work.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

What non-slip bath coating costs

You will know the full cost before you book. We look at:

  • The colour and finish to match
  • Doing more than one item at once
  • The material and finish
  • The type of damage

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

How to get a fixed price

You can typically get a fixed price without us visiting. To help us price it:

  • Where you are, by postcode
  • A photo taken from further back
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.